Description
If you have been hand priming case by case or digging primers out of the box one at a time, the Lee Safety Prime is the kind of upgrade you feel immediately. It mounts to your Lee press and keeps primers moving along a contained feed path, so you load a tray, flip them face-up, and dispense one at a time right into the shell. You never put your fingers on a primer from the box to the case, which keeps things clean and keeps the oils off your primers.
The unit handles both small and large primers, and switching between the two takes just a few seconds. The flip tray uses a CAD-designed surface that rights the primers for you, so instead of fiddling with a flat tray and tapping each one into place, you give it a shake and they settle anvil-side up. From there, every primer is dispensed with a solid, tactile click of the feed trigger so you always know one is seated and ready.
What the Lee Safety Prime Works With
This feeder is built for Lee presses that run the Lever Prime system. That covers 2006 and newer Breech Lock Challenger, Challenger III, the Turret presses, the Classic Turret Press, the Breech Lock Classic Cast, and the Classic Cast Press. If you are running a case-activated powder measure on a Turret setup, keep in mind that depending on your die layout you may need the Lee Powder Measure Riser (sold separately) to give the powder measure enough clearance over the primer tray as the turret rotates.
Why Reloaders Keep the Safety Prime on the Bench
For pistol and rifle loaders cranking through volume, this is one of those small pieces that quietly speeds up the whole process. It seats primers consistently, keeps your hands clean, and takes the fumbling out of priming on the press. Reloaders who make the jump from hand priming tend to say the same thing: it saves time and gives their hands a break during long loading sessions. It is a simple, well-proven accessory that earns its spot in the Lee reloading lineup.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90997
- UPC: 734307909970
- Model: Safety Prime
- Primer Size: Small & Large Primers
- Capacity: 100 Primers
- Material: Nylon
- Finish: White/Clear
- Caliber: Multi-Caliber
- Compatible With: Lee presses with the Lever Prime system (2006 and newer Challenger, Challenger III, Turret, Classic Turret, Breech Lock Classic Cast, Classic Cast)
- Length: 8.5 in
- Width: 5.0 in
- Height: 4.3 in
- Weight: 0.58 lb
- Quantity: 1
What’s Included
- Lee Safety Prime primer feeder (small and large)
- Primer flip tray
Frequently Asked Questions
Which presses does the Lee Safety Prime work with?
It works on Lee presses that use the Lever Prime system. That includes 2006 and newer Breech Lock Challenger, Challenger III, the Turret presses, the Classic Turret Press, the Breech Lock Classic Cast, and the Classic Cast Press. If your press has the lever-style priming arm, this feeder is the right match.
Does the Safety Prime handle both small and large primers?
Yes. This combo unit is set up for both small and large primers, and you can change the primer size in just a few seconds. That makes it easy to jump between pistol and rifle loads without hunting for a separate tool.
Do I need the Powder Measure Riser with the Safety Prime?
On a Turret press running a case-activated powder measure, you may need the Lee Powder Measure Riser depending on your die configuration. The riser lifts the powder measure so it clears the primer tray as the turret rotates. It is sold separately, and many Turret loaders consider it a must-have to avoid the hopper contacting the Safety Prime.
How does the Lee Safety Prime actually feed the primers?
You load primers into the flip tray, give it a shake, and the CAD-designed surface rights them face-up for you. From there, each primer is dispensed one at a time with a tactile click of the feed trigger, so you never have to touch a primer from the box to the shell.




Reviews
There are no reviews yet.