0
0

Lee Precision .329 Classic Bullet Sizing Kit for Cast Bullets #90934

UPC: 734307909345

$19.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you cast your own bullets, you already know a consistent diameter is where good accuracy starts. The Lee Precision .329 Classic Bullet Sizing Kit handles that job without the fuss of custom nose punches or fiddly setups. Bullets are pushed through the sizing die nose first, so there's no hunting for a matching top punch to fit your bullet profile. It's a clean, repeatable way to bring cast bullets down to a uniform .329 diameter, and it seats and crimps gas checks right in the same stroke.

How the .329 Lube and Size Kit Runs

The sizer die uses standard 7/8×14 threads, so it screws straight into any single stage press that takes common dies. The push-through punch installs in the ram where your shell holder normally sits, and it fits rams that use standard shell holders. You place the bullet on the punch, run it up through the die, and your sized bullet pops out the top into the included red plastic container. When the container fills up, you lift it off and pour out a batch of uniform, ready-to-load bullets.

What the .329 Sizing Kit Does for Your Loads

Sizing matters most when a cast bullet runs large enough to swell the case and keep it from chambering freely. Running them through this kit brings every bullet to the same diameter, which helps with consistent start pressure and tighter groups downrange. A good rule of thumb with cast bullets is to size .001 inch over your groove diameter, so this .329 die pairs well with a .328 groove. Keep in mind that all lead bullets need lubrication, and Lee recommends re-lubing after sizing so the sized surface stays coated.

Good to Know About the .329 Classic Bullet Sizing Kit

This is a complete kit for one bullet size, built around a steel sizing die for long service. The press and Lee Liquid Alox are sold separately, so grab a bottle of lube if you don't already have one on the bench. For anyone loading cast rifle bullets in the .329 range, it's a straightforward, no-nonsense tool that earns its spot in the reloading room.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90934
  • UPC: 734307909345
  • Type: Lube & Sizing Kit
  • Sizing Diameter: .329 inch
  • Thread Size: Standard 7/8 x 14
  • Die Material: Steel
  • Press Compatibility: Single stage presses
  • Gas Check Function: Seats and crimps gas checks
  • Country of Origin: United States
  • Shipping Weight: 0.85 lb

What’s Included

  • Steel .329 sizing die
  • Push-through sizer punch
  • Red plastic catch container
  • Instructions

Frequently Asked Questions

Does the .329 Classic Bullet Sizing Kit come with lube?

No, Lee Liquid Alox is sold separately and is not packed in the kit. You'll want a bottle on hand since all lead bullets need lubrication before loading. Lee also recommends re-lubing bullets after sizing so the freshly sized surface stays coated.

What press do I need to use this Lee .329 sizing kit?

The sizer die has standard 7/8×14 threads and is intended for use on single stage presses. It threads into the press just like a regular die, and the push-through punch installs in the ram in place of your shell holder. A press is not included, so you'll be using one you already own.

Which bullet diameter should I pick for my cast rifle bullets?

A common guideline for cast bullets is to size .001 inch larger than your groove diameter. That makes this .329 kit a solid match for a .328 groove. Sizing brings every bullet to a uniform diameter, which helps them chamber cleanly and can tighten up your groups.

Do I need special nose punches for different bullet shapes?

No, that's one of the nice things about this design. Bullets are pushed through the die nose first, so you don't need a top punch matched to each bullet profile. The same push-through punch handles your bullets regardless of nose shape.

Additional information

UPC

734307909345

Manufacturer

Manufacturer Part Number

90934

Shipping Weight

0.85

Reviews

There are no reviews yet.

Be the first to review “Lee Precision .329 Classic Bullet Sizing Kit for Cast Bullets #90934”