Description
The Lee Collet Style Crimp Die for .44 Magnum and .44 Special takes the guesswork out of crimping two cartridges that can be fussy to lock down. Instead of pressing straight down on the case mouth like a traditional roll crimp, this die uses a collet with fingers that close in from the sides and squeeze the case into the bullet. That sideways action is the whole trick here, and it's why reloaders reach for it when they want a consistent crimp without worrying about crushing a case.
What the .44 Collet Crimp Die Does Differently
The collet design means case trim length isn't critical, so you can skip a lot of the fussy measuring and chamfering that other crimp methods demand. It also won't buckle or bulge a case the way downward pressure sometimes can, which keeps your brass in better shape over more loadings. One of the handiest features is that your bullets don't need a crimp groove or cannelure at all. The collet is strong enough to form its own groove, which opens up more bullet choices for your .44 loads.
Where the 90930 Earns Its Keep
This die shines on heavy-recoiling .44 Magnum loads and in lever guns where a weak crimp causes feeding and cycling headaches. Folks running .44 Mag through tube-fed carbines often find it solves bullet-pull and chambering problems that a standard roll crimp leaves behind. It's just as at home on milder .44 Special plinking and target loads. An adjusting screw sets the exact amount of crimp you want, and once it's dialed in, the results stay repeatable round after round.
Fitting the Collet Crimp Die to Your Setup
The die uses standard 7/8-14 threads, so it drops right into any common single-stage or progressive press. Keep in mind this is the collet-style die and is not carbide, so it applies the crimp without resizing the full case body. Lee builds these in the USA, and it ships as a single die ready to add to your .44 bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90930
- Model: Collet Style Crimp Die
- UPC: 734307909307
- Caliber: .44 Magnum / .44 Special
- Die Type: Collet Style Crimp Die
- Crimp Style: Rifle-type collet crimp
- Material: Steel (not carbide)
- Thread Size: 7/8-14
- Dies In Set: 1
- Gun Type: Handgun
- Country of Origin: United States
- Shipping Weight: 0.25 lb
What’s Included
- Lee Collet Style Crimp Die .44 Magnum / .44 Special (90930)
- Storage box
Frequently Asked Questions
How is the Lee Collet Crimp Die different from the carbide factory crimp die?
This collet-style die crimps by squeezing the case into the bullet from the sides, rather than pressing down from the top or running the whole case through a carbide sizing ring. Because of that, it won't buckle a case and it leaves the case body alone, which many reloaders prefer for cast bullets. It is not carbide, so it does not resize the full cartridge while crimping.
Do my bullets need a crimp groove or cannelure to use this die?
No. The collet is strong enough to form its own groove, so you can use bullets without an existing cannelure. That gives you more freedom in choosing bullets for your .44 Magnum and .44 Special loads.
Will the Lee 90930 help with feeding issues in my .44 Magnum lever gun?
Yes, this is a common reason people reach for it. A firm, consistent collet crimp helps keep bullets from pulling under recoil in tube-fed carbines, which cleans up cycling and chambering problems that a weaker roll crimp can leave behind. You adjust the amount of crimp with the die's adjusting screw to get it dialed in.
Does this die fit a standard reloading press?
It does. The die uses standard 7/8-14 threads, so it works in common single-stage and progressive presses. It ships as a single crimp die, so you'd use it as a separate step after seating your bullets.




Reviews
There are no reviews yet.