0
0

Lee Precision Lead Hardness Test Kit 3-Piece (90924)

UPC: 734307909246

$71.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you cast your own bullets or load lead, you already know that not all lead is created equal. Range scrap, wheel weights, and plumber's lead all behave differently once they hit a mold, and guessing at hardness is how you end up with leading in the bore or soft slugs that won't hold up at pressure. The Lee Precision Lead Hardness Test Kit takes the mystery out of it by giving you a repeatable way to measure the Brinell hardness number of any alloy right on your bench.

The process is straightforward and runs in six steps. You press the spring-loaded indenter into your sample, then read the impression under the included Lee pocket microscope. The spring loading is the part that makes this tool worth owning, since it applies a consistent amount of force every time and keeps your readings repeatable instead of being at the mercy of how hard you lean on it. From there you match the impression size to the exclusive conversion chart, which ties the Brinell number to a maximum operating pressure so you can tell at a glance whether your alloy is up to the load you have in mind.

What the Lee Hardness Test Kit Tells You

Hardness is the single best indicator of how a cast bullet will perform. Too soft and you get leading and poor accuracy at higher pressures. Too hard and the bullet won't obturate and seal the bore the way it should. This kit lets you verify where your alloy actually lands, whether you need soft pure lead for muzzleloader roundballs or a harder antimony-tin mix for high-velocity handgun and rifle loads.

Living With the Lee Lead Hardness Test Kit

The three pieces, the cradle, press ram, and microscope, work with any standard reloading press, so there's nothing exotic to set up. The microscope optics read reversed, which throws a few folks off at first, but once you understand how the image moves it becomes second nature and readings come quick. Built from stainless steel and aluminum, it's a tool that earns a permanent spot on the casting bench and pays for itself in components you don't waste.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90924
  • UPC: 734307909246
  • Product Type: Lead Test Kit
  • Size: 3 Piece
  • Function: Measure Lead Hardness (Brinell)
  • Compatible With: Standard Reloading Press
  • Material: Stainless Steel / Aluminum
  • Caliber/Gauge: Multi-Caliber
  • Capacity: 1 Bullet
  • Finish: Silver
  • Weight: 0.68 lbs

What’s Included

  • Lee Pocket Microscope
  • Cradle
  • Press Ram
  • Brinell conversion chart / instructions

Frequently Asked Questions

How does the Lee Lead Hardness Test Kit measure hardness?

It uses a spring-loaded indenter to press a controlled impression into your lead sample, which you then read under the included pocket microscope. The spring loading applies the same force every time, so your readings stay consistent and repeatable. You match the size of the impression to the included conversion chart to get your Brinell hardness number.

Do I need a reloading press to use it?

The kit is designed to work with any standard reloading press using the included cradle and press ram, which gives you the cleanest, most precise impression. That said, because the indenter is spring-loaded and self-regulating, some casters manage a quick field check by hand when they just need to confirm whether a sample is soft or hard. For an accurate Brinell reading, running it on a press is the way to go.

What does the conversion chart actually do?

The exclusive Lee conversion chart ties the Brinell hardness number straight to a maximum safe operating pressure for that alloy. That lets you tell at a glance whether your lead is matched to the load you're building, which cuts down on wasted components from running lead that's too soft or too hard. It's a practical bridge between a raw hardness number and real-world loading decisions.

Is the microscope hard to read?

The optics show a reversed image, so when you move the scope right the view shifts right and so on, which can throw you off the first few times. Once you get the hang of how the image tracks, lining the scale up on the impression becomes quick and second nature. Most folks find it takes just a little practice before readings come easily.

Additional information

UPC

734307909246

Manufacturer

Manufacturer Part Number

90924

Caliber/Gauge

Multi-Caliber

Capacity

1 Bullet

Grains

Universal

Product Type

Lead Test Kit

Quantity

1

Shipping Weight

0.65

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Lead Hardness Test Kit 3-Piece (90924)”