0
0

Lee Factory Crimp Die .375 Win – Collet Rifle Die 90905

UPC: 734307909055

$11.99

23 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .375 Winchester has always been a bit of a handful to crimp by hand, which is exactly where the Lee Factory Crimp Die earns its keep. Instead of relying on a traditional roll crimp, this die uses a collet that gently but firmly squeezes the mouth of the case into the crimp groove, the same way factory-loaded ammo is done. The result is a clean, uniform crimp that holds your bullet tight and keeps your reloads consistent round after round.

That firm hold is more than just a nice-to-have on a cartridge like the .375 Win. A tighter crimp means pressure has to build to a higher level before the bullet starts moving, and that higher start pressure helps smooth out the pressure curve and trim down velocity swings between shots. For a hard-kicking lever-gun round that sees rough handling in the field, having the bullet locked firmly in place also means your loads hold up better in the magazine and on the hunt.

What Sets the Lee .375 Win Factory Crimp Die Apart

The collet in this die is strong enough to form a crimp even on bullets that don't have a cannelure or crimp groove, which opens up a lot of bullet choices you might otherwise skip. Because the crimp is applied by the collet rather than rolled over, it's nearly impossible to buckle a case the way you can with a standard roll crimp die. Trim length isn't critical either, so you can spend less time fussing over case prep and more time loading.

Setting Up the .375 Winchester Factory Crimp Die

Adjustment is refreshingly simple. A screw sets exactly how much crimp you want, so you can dial it in to your load and repeat it every time. It threads into any standard 7/8-14 press and runs as a separate finishing step after seating. The die body is steel and ships in a storage container, ready to drop into your reloading bench as a standalone crimp station for the .375 Win.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90905
  • UPC: 734307909055
  • Caliber: .375 Winchester
  • Product Type: Factory Crimp Rifle Die
  • Crimp Type: Collet (segmented straight crimp)
  • Material: Steel
  • Dies In Set: 1
  • Thread: 7/8-14 (standard press)
  • Application: Rifle cartridge reloading
  • Shipping Weight: 0.4 lb

What’s Included

  • Lee .375 Win Factory Crimp Die (single die)
  • Storage container
  • Instructions

Frequently Asked Questions

Does the Lee .375 Win Factory Crimp Die work with bullets that don't have a cannelure?

Yes. The collet in this die is strong enough to form a crimp even on bullets with no crimp groove. Lee's testing has shown that bullets without a cannelure often shoot more accurately when crimped with this die. That gives you a lot more freedom in your bullet selection.

Is this a complete die set or just the crimp die?

This is a single standalone Factory Crimp Die for the .375 Winchester, not a full reloading set. It's meant to be added as a separate finishing step after you seat your bullets. If you need full-length sizing and seating dies, you'll want those as separate items or as part of a complete Lee die set.

How is the collet crimp different from a regular roll crimp?

Instead of rolling the case mouth over, the collet squeezes the case into the crimp groove from the outside, giving a segmented straight crimp. Because of how it works, it's nearly impossible to buckle a case the way you can with a standard roll crimp die. Trim length is also far less critical, which saves you time on case prep.

Will the Lee .375 Win Factory Crimp Die fit my press?

It uses the standard 7/8-14 thread, so it threads into any common single-stage or turret press. You run it as its own station after seating. Adjusting the crimp is as simple as turning the screw to set the amount you want.

Additional information

UPC

734307909055

Manufacturer

Manufacturer Part Number

90905

Caliber/Gauge

375 WIN

Product Type

Factory Crimp Rifle Die

Shipping Weight

0.4

Reviews

There are no reviews yet.

Be the first to review “Lee Factory Crimp Die .375 Win – Collet Rifle Die 90905”