Description
Loading the .50 BMG is a different animal, and you need the right hardware to hold that massive brass steady through every stroke. The Lee 50 BMG Shell Holder (part number 90903) is the piece that grips the case rim and carries it up into the die, and it's purpose-built for one of the biggest cartridges on the bench.
What the Lee 50 BMG Shell Holder Fits
This one is sized for the Large Series setup, meaning it's made to run on the Lee Classic Cast Press alongside Lee's 50 BMG die sets. If you're putting together a .50 BMG loading station from individual components, this shell holder is on the recommended parts list right next to the press, dies, and Ram Prime tool. One nice bonus is that it also fits the 416 Barrett, so if you happen to shoot both of those big cases, a single holder covers you.
Built Like the Rest of Lee's Gear
Machined from steel and made in the United States, the 90903 is a no-nonsense piece of kit. The design is extended to handle the length and heft of the 50 BMG case, and it slides into the press ram the same way Lee's smaller holders do. There's nothing to overthink here. It drops in, grips the rim, and gets out of the way so you can focus on your loads.
A Must-Have for Serious Big-Bore Reloaders
If you already picked up a 50 BMG die set but it didn't come with a holder, this is the part that completes the chain. The dies and the press do the heavy lifting, but without the correct shell holder you simply can't cycle a case. For anyone running the Classic Cast Press and feeding it those enormous rounds, the 90903 is one of those small parts that makes the whole operation work.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90903
- UPC: 734307909031
- Cartridge: 50 BMG (also fits 416 Barrett)
- Material: Steel
- Press Compatibility: Lee Classic Cast Press / Large Series
- Thread Series: Large Series (1 1/4 x 12)
- Style: Press Type Shell Holder
- Design: Extended
- Country of Origin: United States
- Shipping Weight: 0.45 lb
What’s Included
- Lee 50 BMG Shell Holder (#90903)
Frequently Asked Questions
What press does the Lee 50 BMG Shell Holder work with?
The 90903 is built for the Lee Classic Cast Press and the Large Series 50 BMG setup. It's the holder Lee recommends when you're assembling a .50 BMG loading station from individual parts. If you're running that press with Lee's 50 BMG dies, this is the correct holder.
Does the Lee 50 BMG Shell Holder fit any other cartridges?
Yes. Besides the .50 BMG, this shell holder also fits the 416 Barrett. That makes it a handy single part if you load both of those big cases.
Do I need this shell holder if I already bought a Lee 50 BMG die set?
In most cases, yes. Lee's standalone 50 BMG die sets are sold without a shell holder, so you'll want the 90903 to actually cycle brass. The die sizes the case and the press provides the leverage, but the shell holder is what grips and carries the rim through the die.
What is the Lee 50 BMG Shell Holder made of?
It's machined from steel and made in the United States. The design is extended to accommodate the length and bulk of the 50 BMG case, and it installs in the press ram the same way Lee's other shell holders do.



Reviews
There are no reviews yet.