0
0

Lee Factory Crimp Die .348 Winchester Rifle – 90857

UPC: 734307908577

$12.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Factory Crimp Die for .348 Winchester is the piece a lot of handloaders reach for when they want their rounds to perform like the factory stuff rolling off a production line. Instead of relying on a traditional roll crimp, this die uses a collet that squeezes the mouth of the case inward from several points at once. The result is a firm, even crimp that holds the bullet tight without the risk of buckling the case, which is a common headache with older-style roll crimp dies on a big, tapered case like the .348.

Why the .348 Win Factory Crimp Die Earns Its Spot on the Bench

A good crimp does more than keep the bullet from sliding. A firm hold means pressure has to build to a higher point before the bullet starts moving, and that higher start pressure tends to produce a more uniform pressure curve with less shot-to-shot velocity variation. For a classic lever-gun cartridge like the .348 Winchester, loaded for hunting and knocked around in a saddle scabbard or a pack, that consistency matters.

Running the Lee .348 Factory Crimp Die

This is the standalone accessory crimp die, built with the common 7/8-14 thread so it screws right into any standard single-stage or turret press. One of its best tricks is that bullets do not need a cannelure or crimp groove for it to work. The collet is strong enough to form its own seat into the jacket or lead, so you get a repeatable crimp even on bullets that were never designed with one. The adjustment is straightforward too, so dialing in exactly how much crimp you want is quick once you find your setting.

If you are already running a Lee die set and want to tighten up your loads for the field, or you are chasing a little more consistency out of your .348 brass, this die is a simple, well-proven addition. It handles a wide range of bullet styles and keeps your handloads tight, accurate, and ready to take a beating.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90857
  • UPC: 734307908577
  • Caliber: .348 Winchester
  • Die Type: Factory Crimp Rifle Die (collet style)
  • Crimp Style: Segmented straight / factory-type crimp
  • Thread: 7/8-14 (standard)
  • Dies In Set: 1
  • Intended Use: Rifle cartridge reloading
  • Shipping Weight: 0.35 lb
  • Country of Origin: United States

What’s Included

  • Lee .348 Winchester Factory Crimp Die (1 die)
  • Instructions

Frequently Asked Questions

Does the Lee .348 Winchester Factory Crimp Die require bullets with a crimp groove?

No. The collet is strong enough to form its own crimp into the bullet, so it works even with bullets that have no cannelure or crimp groove. That flexibility is one of the big reasons handloaders like it for the .348.

Will this die fit a standard reloading press?

Yes. It uses the common 7/8-14 thread, so it threads right into any standard single-stage or turret press. No special adapters needed.

What makes this different from a regular roll crimp die?

A roll crimp bends the case mouth over and can buckle the case if the length is off. This Lee die uses a collet that squeezes the mouth in from several points, giving a firm, even crimp that is very difficult to buckle. It also tends to produce a more uniform pressure curve and less velocity variation.

Do I still need a full die set if I buy this crimp die?

This is a standalone crimp die, so it does not size the case or seat the bullet. You will still need a sizing die and a seating die to load complete rounds, but many reloaders add this one as a dedicated crimp step for better consistency.

Additional information

UPC

734307908577

Manufacturer

Manufacturer Part Number

90857

Shipping Weight

0.35

Reviews

There are no reviews yet.

Be the first to review “Lee Factory Crimp Die .348 Winchester Rifle – 90857”