0
0

Lee Precision Factory Crimp Die .44-40 Winchester (90854)

UPC: 734307908546

$12.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .44-40 Winchester has a reputation for being a pain to crimp. Thin case mouths, soft brass, and a tapered shape mean a standard roll crimp can crush or buckle a case before you ever get a good hold on the bullet. The Lee Precision Factory Crimp Die solves that headache with a collet system that gently squeezes the case mouth into the crimp groove, giving you a tight, uniform crimp without the risk of folding brass.

This is a single die, numbered 90854, and it runs as a separate final step on your press after seating. One of the things reloaders appreciate most is that your brass doesn't all have to be trimmed to the exact same length for it to work, so trim length isn't critical the way it is with roll crimp setups. That alone saves a lot of fuss when you're working with a mixed lot of .44-40 cases.

Why the Lee .44-40 Factory Crimp Die Earns Its Spot on the Bench

A firm crimp does more than keep the bullet from walking out under recoil. Pressure has to build to a higher level before the bullet starts to move, which makes for a more uniform pressure curve and tighter velocity numbers. That matters in lever guns like the Henry and Marlin where rounds get knocked around in the magazine tube, and it keeps bullets from being pushed deeper into the case during feeding. Lee's own testing shows that even bullets without a crimp groove shoot more accurately once they're crimped in place.

Fitting the Factory Crimp Die to Your Press

This die uses the standard 7/8-14 thread, so it threads into just about any single stage or turret press you're likely to own. It's made of steel and ships in a plastic storage box to keep it clean on the shelf. Keep in mind a shellholder is not included, so if you don't already have one sized for the .44-40, you'll want to grab it separately. Pair this with a seating die and it turns a frustrating cartridge into a straightforward reload.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90854
  • UPC: 734307908546
  • Caliber: .44-40 Winchester (.44 WCF)
  • Product Type: Factory Crimp Rifle Die
  • Crimp Style: Collet / segmented straight crimp
  • Dies in Set: 1 (single die)
  • Material: Steel
  • Thread: 7/8-14
  • Length: 4.75 in
  • Shipping Weight: 0.37 lb

What’s Included

  • Lee Precision .44-40 Winchester Factory Crimp Die (90854)
  • Plastic storage container
  • Instructions

Frequently Asked Questions

Do my .44-40 cases all need to be trimmed to the same length to use this die?

No, and that's one of the big advantages of the Lee Factory Crimp Die. The collet squeezes the case mouth into the crimp groove rather than relying on case length to set the crimp depth, so trim length isn't critical. It makes working with mixed or once-fired .44-40 brass a lot less fussy.

Will this die work if my bullets don't have a crimp groove or cannelure?

Yes. The collet on the Lee Factory Crimp Die is strong enough to form its own crimp into the bullet, so a crimp groove isn't required. Lee's testing shows bullets without a cannelure still shoot more accurately once they're crimped this way.

Does the .44-40 Factory Crimp Die come with everything I need to load the cartridge?

This is a single crimp die only, meant to be added as a final step after you've already sized, expanded, and seated your bullets. You'll still need a sizing die and a seating die to load complete rounds. A shellholder is not included either, so pick one up for the .44-40 if you don't have it.

What press does the Lee .44-40 Factory Crimp Die fit?

It uses the standard 7/8-14 thread, which fits the vast majority of single stage, turret, and progressive presses. If your press takes common reloading dies, this one will thread right in.

Additional information

UPC

734307908546

Manufacturer

Manufacturer Part Number

90854

Caliber/Gauge

.44-40 Winchester

Length

4.7500

Product Type

Factory Crimp Rifle Die

Shipping Weight

0.3688

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Factory Crimp Die .44-40 Winchester (90854)”