0
0

Lee Factory Crimp Die .30-40 Krag – Collet Rifle Crimper 90843

UPC: 734307908430

$10.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimping bottleneck rifle brass has always been the tricky part of a reload, and the Lee Factory Crimp Die for .30-40 Krag takes the guesswork out of it. Instead of rolling the case mouth down from the top like a standard seating die, it uses a collet with four fingers that close in around the neck and press the brass into the bullet from the sides. The result is a clean, uniform crimp that holds your bullet tight and keeps your velocities consistent from round to round.

What Sets the .30-40 Krag Factory Crimp Die Apart

Because the collet works sideways instead of pushing down, you don't get the case buckling or crumpling that trips people up with roll crimps. Trim length also becomes a lot less fussy, since the crimp isn't relying on exact case length to come out right. A big draw here is that your bullets don't need a cannelure at all. The collet is strong enough to form its own crimp groove, so you can run jacketed, cast, or lead bullets and still get a solid, repeatable hold.

Dialing In the Crimp

Setting it up is about as simple as reloading gear gets. The die threads into any press with standard 7/8 by 14 threads, and a single adjusting screw lets you set exactly how much crimp you want. Back it off for a light touch or snug it down for a firmer bite on heavy hunting loads where you want zero bullet movement under recoil. It's a smart separate step for anyone who likes to seat and crimp independently for better consistency.

Why Krag Reloaders Reach for It

The .30-40 Krag is a classic worth loading well, and a firm crimp genuinely helps accuracy by letting pressure build before the bullet breaks free. That more uniform pressure curve means tighter velocity spreads and better groups downrange. The die is made of steel and ships in a fitted plastic storage box with instructions, so it's ready to go on your bench right out of the package.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90843
  • UPC: 734307908430
  • Caliber: .30-40 Krag
  • Product Type: Factory Crimp Rifle Die
  • Crimp Style: Four-finger collet crimp
  • Thread Size: 7/8 x 14 (standard)
  • Dies In Set: 1
  • Material: Steel
  • Country of Origin: United States
  • Shipping Weight: 0.3875 lbs

What’s Included

  • Lee Factory Crimp Die for .30-40 Krag
  • Fitted plastic storage box
  • Instructions

Frequently Asked Questions

Does the Lee Factory Crimp Die for .30-40 Krag require a bullet with a cannelure?

No, it does not. The collet in this die is powerful enough to form its own crimp groove, so you can crimp bullets that have no cannelure. That makes it handy whether you're running jacketed or cast bullets in your Krag loads.

Will this die fit my reloading press?

Yes, it uses standard 7/8 by 14 threads, so it threads right into any common single-stage, turret, or progressive press. You also pick the matching shell holder separately if you don't already have one for the Krag rim.

How is a collet crimp different from the crimp in my regular seating die?

A standard seating die rolls the case mouth down from the top, which can buckle brass if your cases aren't all the same length. This die's collet squeezes the neck inward from four sides instead, giving a cleaner crimp that's far less sensitive to trim length. It also lets you seat and crimp as separate steps for better consistency.

Can I adjust how much crimp the die applies?

Yes. A single adjusting screw sets the amount of crimp, so you can go light for target loads or firm it up for hunting rounds that need to resist bullet movement under recoil. It's quick to dial in once you get a feel for it.

Additional information

UPC

734307908430

Manufacturer

Manufacturer Part Number

90843

Caliber/Gauge

.30-40 Krag

Product Type

Factory Crimp Rifle Die

Shipping Weight

0.3875

Reviews

There are no reviews yet.

Be the first to review “Lee Factory Crimp Die .30-40 Krag – Collet Rifle Crimper 90843”