Description
The Lee Factory Crimp Die for .30-06 Springfield is one of those simple tools that quietly makes your reloads better. Instead of relying on a traditional roll crimp, it uses a collet that gently but firmly squeezes the case mouth around the bullet, giving you a clean, uniform crimp every time. The nice part is that your bullets don't need a crimp groove or cannelure for it to work. The collet forms its own hold, so you get consistent results across a wide range of projectiles.
Why does a good crimp matter on a round like the .30-06? It comes down to start pressure. A firmer crimp means pressure has to build a little higher before the bullet breaks free and starts down the bore. That more uniform pressure curve tends to tighten up your velocity spreads, which usually translates into better accuracy downrange. It also keeps your bullets seated where you put them, which is worth its weight in gold for hunting loads that get bounced around in the truck, the pack, or the magazine.
Setting Up the .30-06 Factory Crimp Die
This die threads into any standard press with 7/8"-14 threads, so it drops right into whatever setup you're already running. The adjustment is straightforward, and because it's a dead-length style collet crimp, case length isn't nearly as fussy as it is with a roll crimp. You back off, run a case up, and dial in the amount of crimp you want. One thing worth knowing up front: this is a single die, and it does not include a shell holder, so grab the correct one if you don't already have it.
Built Steel for the Long Haul
Machined from steel and part of Lee's proven Factory Crimp lineup, the 90824 is built to run through thousands of rounds without complaint. If you're loading .30-06 for deer, elk, or just want more consistent groups at the range, adding this crimp die to your bench is an easy call that pays off in dependable, factory-like ammunition.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90824
- UPC: 734307908249
- Caliber: .30-06 Springfield
- Product Type: Factory Crimp Rifle Die
- Crimp Style: Collet / segmented straight crimp
- Material: Steel
- Carbide: No
- Dies in Set: 1
- Press Thread Fit: 7/8"-14 (standard)
- Length: 4.75 in
- Shell Holder Included: No
What’s Included
- Lee Factory Crimp Die for .30-06 Springfield (single die)
- Instruction sheet
Frequently Asked Questions
Does the Lee Factory Crimp Die for .30-06 come with a shell holder?
No, this is sold as a single die and the shell holder is not included. If you're reloading .30-06 you'll want the matching shell holder to run cases up into the die. Many reloaders already have one on the bench from their sizing and seating dies.
Will this crimp bullets that don't have a cannelure or crimp groove?
Yes. The collet in this die squeezes the case mouth around the bullet and forms its own hold, so a crimp groove isn't required. That makes it handy for a wide range of .30-06 projectiles, including match and hunting bullets without a cannelure.
Does the Lee .30-06 Factory Crimp Die fit my press?
It fits any standard reloading press with 7/8"-14 threads, which covers the vast majority of single stage and turret presses out there. You simply thread it in like your other dies and adjust the crimp to taste.
Is this a carbide die?
No, the 90824 is a steel Factory Crimp Die, not a carbide model. It applies a collet-style crimp to your .30-06 cases and holds up to high-volume reloading. It's a different tool than Lee's carbide pistol crimp dies.





Reviews
There are no reviews yet.