0
0

Lee Taper Crimp Die for 9mm Luger (90780) – Hardened Steel Pistol Die

UPC: 734307907808

$10.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimp is one of those reloading steps that quietly decides whether your rounds feed clean or hang up on the ramp, and the Lee Taper Crimp Die for 9mm Luger takes care of that final touch. It applies a straight taper crimp to the case mouth, which is exactly what you want on a rimless semi-auto cartridge like 9mm. Instead of rolling the mouth inward, it gently squeezes the brass back against the bullet so the round headspaces correctly and chambers without drama. The die body is turned from hardened steel and uses the standard 7/8"-14 thread, so it drops right into any common single-stage or progressive press.

What the Lee 90780 Crimp Die Actually Does

This is a dedicated crimp-only die, meaning it does one job and does it well. A proper taper crimp leaves the case mouth running straight or with just a hair of inward taper, which helps feeding and keeps bullets seated under recoil. Reloaders who run it on their 9mm pistols often notice rounds dropping into the chamber cleaner, and plenty have measured a full batch with calipers and found consistent, uniform results. If you shoot jacketed bullets, keep in mind they need a crimp groove, or cannelure, for the crimp to grab properly.

One Die, Four Calibers

One of the nicer things about the 90780 is its range. It is set up to crimp 9mm Luger, 38 Super, 38 ACP, and 380 Auto, so if you load more than one of those, you are not buying a separate tool for each. That makes it a handy addition for anyone building out a pistol loading bench.

Fitting It Into Your Setup

The die threads in just like any other, and you adjust it down until you get the crimp you are after. It works whether you are running a basic single-stage rig or something like a Lee progressive press. For folks running older Lee die sets from 1986 or newer, those already use a modified taper crimp, so this die shines most when you want dedicated crimp control or you are working with mixed or older die setups.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90780
  • Model: Taper Crimp Die
  • UPC: 734307907808
  • Product Type: Taper Crimp Pistol Die
  • Caliber Compatibility: 9mm Luger / 38 Super / 38 ACP / 380 Auto
  • Material: Hardened Steel
  • Thread Size: 7/8"-14
  • Number of Dies: 1
  • Shell Holder Included: No
  • Storage Box Included: Yes
  • Country of Origin: United States

What’s Included

  • Lee Taper Crimp Die (1)
  • Storage box

Frequently Asked Questions

What does the Lee Taper Crimp Die do for 9mm reloads?

It applies a taper crimp to the case mouth, which squeezes the brass back against the bullet without rolling it inward. On a rimless cartridge like 9mm Luger, that helps the round headspace correctly and feed smoothly. It also improves bullet retention so loads stay put under recoil.

Does this die work for calibers besides 9mm Luger?

Yes. The 90780 is designed to crimp 9mm Luger, 38 Super, 38 ACP, and 380 Auto. If you load more than one of those cartridges, this single die covers all of them.

Will the Lee Taper Crimp Die fit my press?

It uses the standard 7/8"-14 thread, so it threads into virtually any common single-stage or progressive reloading press. That includes Lee presses as well as other popular brands using the same thread standard.

Do I need a crimp groove on my bullets to use this die?

Jacketed bullets should have a crimp groove, also called a cannelure, for the taper crimp to grab properly. If your jacketed bullets lack that groove, the crimp may not hold as intended. Many cast and plated bullets are more forgiving in this regard.

Additional information

UPC

734307907808

Manufacturer

Manufacturer Part Number

90780

Caliber/Gauge

.380 ACP

Length

5.7500

Product Type

Taper Crimp Pistol Die

Shipping Weight

0.4625

Reviews

There are no reviews yet.

Be the first to review “Lee Taper Crimp Die for 9mm Luger (90780) – Hardened Steel Pistol Die”