Description
The 25-35 Winchester is one of those classic lever-gun cartridges that has mostly disappeared from ammo shelves, which makes reloading the smart way to keep an old Winchester or Marlin fed. The Lee Precision 25-35 Winchester Pacesetter 2-Die Set gives you the core tooling to do exactly that, carrying the same build and quality as Lee's standard dies while being produced in smaller runs for less common calibers like this one.
What the Lee 25-35 Pacesetter Set Does
This is a steel full-length sizing setup, so the sizing die brings fired brass back to factory dimensions and the finished rounds chamber reliably and hold up to the rough handling a lever action dishes out. That makes it a solid pick for hunting loads and general plinking where you want ammo that just works. The full-length sizing die does require case lube, so keep a tube of resizing lubricant on the bench.
Dies Built to Last
Lee bores and hones every die to a fine internal finish, going past a simple surface polish for a smooth working surface with no waves or ripples. The bullet seating die has a built-in roll crimp and a free-floating seating plug that works with just about any bullet point style, and it accepts a wide range of 25-caliber projectiles. These are backed by Lee's guarantee, which has made the Pacesetter line a long-running favorite with reloaders working odd and obsolete calibers.
Why the 25-35 Pacesetter Set Makes Sense
The big draw with the Pacesetter sets is the included load data, which is genuinely valuable when you're loading a vintage cartridge that isn't easy to find recipes for. You also get the correct universal shell holder and a powder dipper right in the box. Worth noting, this 2-die set does not include a Lee Factory Crimp Die, since that's reserved for the 3-die sets. For most 25-35 lever-gun reloaders, the full-length sizer and seating die cover everything you need to turn once-fired brass into shootable ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90778
- UPC: 734307907785
- Caliber: .25-35 Winchester
- Die Series: Pacesetter
- Product Type: Pacesetter Rifle Dies w/Shell Holder
- Dies In Set: 2
- Sizing: Full-Length (lube required)
- Metal Type: Steel
- Thread: 7/8-14 (fits standard presses)
- Shell Holder: Included
- Factory Crimp Die: Not Included
What’s Included
- Full-length sizing die
- Bullet seating die with roll crimp
- Universal shell holder
- Powder dipper
- Instructions and load data
Frequently Asked Questions
Does the Lee 25-35 Pacesetter 2-die set include a factory crimp die?
No, this 2-die set does not come with a Lee Factory Crimp Die. The crimp die is included with Lee's 3-die sets instead. This set includes the full-length sizing die and the bullet seating die, which has a built-in roll crimp.
What comes in the box with this 25-35 Winchester die set?
You get a full-length sizing die, a bullet seating die, the correct universal shell holder, a powder dipper, and printed instructions with load data. That load data is especially handy for an older cartridge like the 25-35 where recipes can be tough to track down.
Do these dies require case lubrication?
Yes. The full-length steel sizing die needs case lube to run smoothly and protect your brass, so pick up a tube of resizing lubricant if you don't already have some on the bench. This is standard for full-length sizing dies of this type.
Will this Lee die set fit my reloading press?
It should. Lee dies use the standard 7/8-14 thread, so they thread into common single-stage and turret presses from Lee, RCBS, Hornady, Lyman, and Dillon. The included shell holder is sized for the 25-35 Winchester case.




Reviews
There are no reviews yet.