Description
The 7.62 Tokarev is one of those calibers that rewards reloaders. Factory ammo can be scarce and brass is worth keeping, so a dedicated die set earns its spot on the bench fast. Lee's Steel 3-Die Set for 7.62x25mm Tokarev gives you the full package: a full-length sizing die, a powder through expanding die, and a bullet seating die with built-in crimp. It threads standard 7/8"-14, so it drops right into Lee, RCBS, Hornady, Lyman, Dillon, and pretty much any modern single-stage or progressive press.
What the Lee 7.62 Tokarev Die Set Does on the Press
The sizing die is steel rather than carbide, which means you'll want to lube your cases before running them through. That's standard practice for a bottlenecked case like the Tokarev anyway, and the steel sizer is contour ground for smooth, step-less resizing. The powder through expanding die lets you flare the case mouth and charge powder in one motion, pairing nicely with a funnel or a Lee Auto-Disk measure. The seating die flares just enough for easy bullet insertion and removes that flare on the downstroke, so you get a clean seat and crimp in one pass.
Why the Steel Set Makes Sense for the Tokarev
The 7.62x25mm is a bottleneck design, and carbide sizing rings aren't practical for that shape. That's exactly why Lee builds this one as a steel set. Each die has an enlarged mouth that helps guide in range-beat brass without hanging up, which is handy when you're feeding a mix of once-fired and tired cases. Reloaders running this set consistently report it sets up quick and runs clean right out of the box.
You're getting a complete, no-nonsense setup here. Some folks like to add a Lee Factory Crimp Die for extra consistency, but the seater's built-in crimp covers you for standard loads. For a caliber that's tough to feed with factory ammo, having the right dies on hand keeps you shooting.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90769
- Model Number: 90769
- UPC: 734307907693
- Caliber: 7.62x25mm Tokarev
- Product Type: Steel 3-Die Set, Pistol
- Number of Dies: 3
- Die Types: Full-Length Sizer, Powder Through Expander, Bullet Seater with Crimp
- Die Material: Steel (case lubrication required for sizing)
- Thread Size: 7/8"-14
- Shellholder: Included
- Country of Origin: United States
- Shipping Weight: 1.21 lbs
What’s Included
- Full-length steel sizing die
- Powder through expanding die
- Bullet seating die with built-in crimp
- Universal shellholder
- Powder dipper / powder measure
- Instructions and load data chart
- Fitted storage box
Frequently Asked Questions
Do I need to lube my cases with this Lee Tokarev die set?
Yes. This is a steel die set, not carbide, so the full-length sizing die requires case lubrication before resizing. The 7.62x25mm is a bottleneck case, which is why Lee builds it as a steel set rather than carbide. A thin, even coat of sizing lube keeps everything running smooth and protects your brass.
Will these dies fit my press?
They should. The dies use the standard 7/8"-14 thread, so they fit Lee, RCBS, Hornady, Lyman, Dillon, and other common single-stage and progressive presses. The set also ships with the correct universal shellholder, so you're ready to load without buying extras.
Does this set include a crimp die?
The bullet seating die has a built-in crimp, so you can seat and crimp in one step for standard loads. Because the expander flares only a minimal amount, the seating die removes that flare and finishes the crimp cleanly. Some reloaders like to add a separate Lee Factory Crimp Die for extra consistency, but it isn't required to load good ammo.
What comes in the box with the 90769 die set?
You get the full-length steel sizing die, the powder through expanding die, and the bullet seating die with crimp. It also includes a universal shellholder, a powder dipper, and an instructions and load data sheet, all packed in a fitted storage box. It's a complete setup to start loading 7.62x25mm Tokarev.




Reviews
There are no reviews yet.