Description
Loading for the 8mm Lebel (8x50R) isn't something most folks stumble into, so having a purpose-built die set that covers the obscure stuff makes life a whole lot easier. This Lee Precision Pacesetter 2-Die Set is part of Lee's Limited Production lineup, which means it's made in smaller runs for cartridges you won't find on every shelf. It gives you the two dies that matter most for turning once-fired or range brass into shootable rounds, and it ships with the extras you need to get started rather than making you chase down a shell holder separately.
What the 8mm Lebel Die Set Brings to the Bench
Inside the box you get a full length steel sizing die and a bullet seating die. The full length sizer brings your brass back to spec so rounds chamber and feed reliably, which is exactly what you want when you're feeding an old service rifle and working with mixed brass. The sizing die is steel, so plan on lubricating your cases before running them through. The seating die handles bullet seating depth and roll crimping in one step, and it's set up for the .323 inch bullet diameter the 8mm Lebel uses.
Fitment and Everyday Use for the Pacesetter 2-Die Set
Lee dies use the standard 7/8-14 thread, so this set threads right into Lee, RCBS, Hornady, Lyman, Dillon, and pretty much any modern single stage or turret press. The included universal shell holder and powder dipper mean you've got the basics covered, and the printed instructions come with load data, which is genuinely handy on an oddball cartridge where good data can be tough to track down.
Built for the Obscure Calibers
This is one of the few die sets out there made specifically for the Lebel, and that alone makes it worth having if you own one of these rifles. Lee's dies are machine honed for a smooth finish, and the whole set is made in the USA. For anyone keeping a vintage Berthier or Lebel rifle fed, this is the straightforward way to make your own ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90768
- UPC: 734307907686
- Caliber: 8mm Lebel (8x50R)
- Product Type: Pacesetter Limited Production Rifle Dies w/ Shell Holder
- Die Series: Pacesetter
- Number of Dies: 2
- Die Material: Steel
- Bullet Diameter: .323 inch
- Thread Size: 7/8-14
- Shell Holder: Included
- Country of Origin: United States
- Shipping Weight: 0.85 lbs
What’s Included
- Full Length Steel Sizing Die
- Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
Frequently Asked Questions
What comes in the Lee Pacesetter 2-Die Set for 8mm Lebel?
You get a full length steel sizing die and a bullet seating die, along with a universal shell holder, a powder dipper, and printed instructions that include load data. This is Lee's Limited Production two-die configuration, so it does not include a separate Factory Crimp Die. Everything you need to start loading 8mm Lebel is in the box.
Will this 8mm Lebel die set fit my press?
Yes. Lee dies use the standard 7/8-14 thread, so this set works with modern single stage and turret presses from Lee, RCBS, Hornady, Lyman, and Dillon. If your press takes common reloading dies, this one will thread right in.
What bullet diameter does this set seat?
The seating die is set up for the .323 inch bullet diameter used by the 8mm Lebel cartridge, also known as 8x50R. Make sure the bullets you're loading match that diameter for proper seating and crimp.
Do I need case lube with the Pacesetter 2-Die Set?
Yes, the full length sizing die is steel, so you'll want to lubricate your brass before running it through to avoid stuck cases. Case lube is not included in this set, so grab some separately if you don't already have it on the bench.




Reviews
There are no reviews yet.