Description
Case trimming is one of those chores that can make or break your reloading session, and the Lee Precision Quick Trim Die for 6.5 Grendel takes most of the fuss out of it. This die threads into your press just like a standard sizing die, then works together with Lee's Deluxe or Value Quick Trim Case Trimmer to bring your brass back to spec. As you turn the crank on the trimmer, the die acts as a built-in jig that trims the case to the correct length while chamfering and deburring the inside and outside of the mouth all in one motion. No calipers, no guessing, no fiddling with a cutter every few cases.
How the 6.5 Grendel Quick Trim Die Earns Its Keep
The 6.5 Grendel runs best when every case is prepped the same way, and consistent length is a big part of that. Reloaders who run this die report trim results holding within about .001 inch across their Grendel brass, which is exactly what you want for a cartridge known for reaching out there. The adjustable stop lets you set your length once and repeat it over and over, so a bulk batch of range brass comes out uniform from the first case to the last.
Built to Last on the Lee Quick Trim System
This is the die body only, machined from high carbon steel so it holds up to plenty of use with minimal wear. It uses the standard 7/8-14 thread, so it drops into any press that accepts common reloading dies. Keep in mind you will need the Quick Trim Case Trimmer to put it to work, since the die and trimmer are designed as a team. For folks running large volumes of Grendel brass, Lee's Power Quick Trim adapter can speed things up even further.
If you shoot the 6.5 Grendel and want a straightforward way to keep your brass trimmed, chamfered, and ready to load, this die is a smart little piece of kit to have on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90763
- UPC: 734307907631
- Caliber: 6.5mm Grendel
- Product Type: Quick Trim Die
- Die Type: Trimmer
- Die Series: Quick Trim
- Dies In Set: 1
- Thread: 7/8-14
- Material: High Carbon Steel
- Carbide: No
- Country of Origin: United States
What’s Included
- Lee Precision Quick Trim Die body for 6.5 Grendel
Frequently Asked Questions
Does the Lee Quick Trim Die come with the case trimmer?
No, this is the die body only. It's designed to work with the Lee Deluxe Quick Trim or Value Trim Case Trimmer, which is sold separately. You'll need one of those trimmers to put the die to use.
How does the 6.5 Grendel Quick Trim Die work?
You screw the die into your press like a standard reloading die, then adjust it to your desired trim length. With the Quick Trim Case Trimmer attached, you turn the crank and the die trims the case to length while chamfering and deburring the mouth. There's no need to measure each case with calipers.
How consistent are the trim lengths with this die?
The die uses an adjustable stop that lets you dial in your length and repeat it. Reloaders running Grendel brass through it report results holding within about .001 inch case to case, which keeps a bulk batch nice and uniform for loading.
Will this die fit my press?
Yes, it uses the standard 7/8-14 thread, so it fits any press that accepts common reloading dies. That covers the vast majority of single-stage and turret presses on the market.





Reviews
There are no reviews yet.