Description
The .38-40 Winchester is one of those classic cartridges that shines in old Colt and Winchester lever actions and single actions, and it's a caliber where handloading really pays off. This Lee Pacesetter set covers the full job of making your own .38-40 ammo, from resizing fired brass to seating and crimping your bullets. You get three steel dies plus the extras most sets make you buy separately, which is a big part of why Lee sets earn their reputation for value.
What the Lee Pacesetter .38-40 Set Handles
The set includes a full-length sizing die, an Easy Adjust Dead Length bullet seating die, and the Lee Factory Crimp Die. The full-length sizer brings fired cases back to proper spec so they chamber reliably, while the dead length seater helps you dial in consistent overall length without guesswork. The Factory Crimp Die is the real standout here, putting a firm, repeatable crimp on your rounds that tightens up consistency and keeps bullets seated under recoil, which matters with the thin-walled .38-40 brass.
Set Up and Running Fast
Along with the three dies, the box comes with the correct universal shell holder, a powder dipper, and an instruction sheet with starter load data. That last part is handy for the .38-40 since it's not a caliber every reloading manual covers in depth. The dies thread into any standard 7/8-14 single stage or turret press, so they drop right into whatever setup you're already running.
The .38-40 can be a slightly fussy case to load because of its thin neck and slight bottleneck, but the Lee tooling is forgiving and well suited to the cartridge. For cowboy action loads, plinking, or feeding an heirloom lever gun, this set gives you the core tools to turn out clean, dependable ammo at a fraction of factory cost. Keep your brass in good shape, follow the included data, and these dies will serve for a very long time.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90761
- UPC: 734307907617
- Caliber: .38-40 Winchester
- Product Type: Steel 3-Die Set
- Die Series: Pacesetter
- Dies in Set: 3
- Material: Steel
- Shell Holder: Included (Universal)
- Thread: 7/8-14 standard
- Length: 4.85 in
- Shipping Weight: 1.14 lb
What’s Included
- Full-length sizing die
- Easy Adjust Dead Length bullet seating die
- Lee Factory Crimp Die
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
Frequently Asked Questions
What dies come in the Lee Pacesetter .38-40 set?
The set includes three steel dies: a full-length sizing die, an Easy Adjust Dead Length bullet seating die, and the Lee Factory Crimp Die. On top of the dies you also get the correct universal shell holder, a powder dipper, and an instruction sheet with load data. That combination means you have the core tooling to resize, seat, and crimp .38-40 Winchester without buying extra parts.
Do I need to buy a separate shell holder for this set?
No, the correct universal shell holder is included in the box. That's one of the nice perks of Lee Pacesetter sets compared to some competitors that sell the shell holder separately. You will still need a standard press, dipper or powder measure, and a reloading scale for a complete bench setup.
Will these dies work in my single stage or turret press?
Yes, the dies use the standard 7/8-14 thread found on virtually all common single stage and turret presses, so they'll thread right in. The .38-40 loads well on a single stage for lower volume work and on a turret if you want to speed things up. Just follow the included instructions for setting the sizing and seating depth.
What makes the Factory Crimp Die worth having for .38-40?
The .38-40 has thin case walls and a slight bottleneck, which can make a consistent crimp tricky. The Lee Factory Crimp Die applies a firm, uniform crimp that helps keep bullets seated under recoil and improves round-to-round consistency. It's especially useful for lever-action and cowboy action loads where reliable feeding matters.





Reviews
There are no reviews yet.