Description
The .32-40 Winchester is one of those old-school blackpowder-era cartridges that's tough to find on the shelf, which makes reloading the smart way to keep a .32-40 fed. Lee's Pacesetter 2-Die Set covers the two jobs that matter most: resizing fired brass back to spec and seating your bullet where you want it. It's a complete starting point for anyone running this cartridge through a lever gun or a single-shot rifle.
What the Lee 90758 Pacesetter Set Brings to the Bench
This set includes a full-length sizing die and a bullet seating die, both machined from steel for a long working life. The full-length sizing die squeezes case dimensions back down across the whole body, which is the way to go when you're working with range brass or cases picked up from different rifles. Once your brass is sized and primed, the seating die sets bullet depth with repeatable results so your rounds chamber clean every time.
More Than Just the Dies
One thing folks appreciate about Lee is that they don't make you hunt down the extras. The Pacesetter 2-Die Set ships with the correct universal shell holder and a powder dipper, so you're not scrambling for parts that other brands leave out. Just as handy, Lee includes printed load data and instructions in the box, which is genuinely useful on an obsolete caliber like the .32-40 where load info can be hard to come by.
Good Fit for the .32-40 Winchester Crowd
Reloaders working with vintage rifles have had real success here, including folks loading original Winchester brass that's over a century old. This is a 2-die set, so it does not include a Lee Factory Crimp Die, though you can add one later if your loads call for a firm crimp. For most .32-40 shooting with cast or jacketed bullets, the full-length sizing and seating dies in this set cover what you need to turn out consistent, reliable ammo.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90758
- UPC: 734307907587
- Caliber: .32-40 Win (.32-40 Ballard / WCF)
- Die Series: Pacesetter
- Die Type: Full-Length 2-Die Set
- Dies in Set: 2
- Die Material: Steel
- Gun Type: Rifle
- Length: 4.65 in
- Shipping Weight: 1.05 lbs
What’s Included
- Full-length sizing die
- Bullet seating die
- Universal shell holder
- Powder dipper
- Instructions and load data
Frequently Asked Questions
What dies come in the Lee 90758 Pacesetter set?
This set includes a full-length sizing die and a bullet seating die. It also comes with the correct universal shell holder, a powder dipper, and printed load data and instructions. That covers the core steps of resizing and seating for .32-40 Winchester.
Does the Lee .32-40 Pacesetter set include a Factory Crimp Die?
No, this is a 2-die set, so a Lee Factory Crimp Die is not included. The Pacesetter 2-Die sets carry the same quality as Lee's standard dies but leave out the crimp die to keep things simple. If you want a dedicated crimp step, you can pick up a Factory Crimp Die separately.
Will these dies work with vintage .32-40 brass?
Yes. The full-length sizing die resizes the entire case body, which makes it a good match for older or mixed brass. Reloaders have reported success using these dies on original Winchester brass well over a hundred years old, so they handle both modern and antique cases.
Do I need the shell holder separately with this set?
No, the correct universal shell holder is already included in the box. Lee bundles it in along with the powder dipper and load data, so you have what you need to get started without chasing down extra parts.



Reviews
There are no reviews yet.