0
0

Lee Precision 90741 Six Cavity Mold 7.62x39mm 155gr .312

UPC: 734307907419

$42.99

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 90741 is a six cavity bullet mold built for reloaders who go through a lot of 7.62x39mm and would rather cast their own than keep buying projectiles. Each pour drops six .312 diameter, 155 grain round nose bullets with a two ogive radius and a gas check design, which makes it a strong match for the AK platform, SKS rifles, and anything else chambered in 7.62×39. The mold blocks are CNC machined from commercial grade aluminum, so they heat up and cool down faster than iron or steel, and you can usually start pulling good bullets after just a few casts.

What Sets the 90741 Six Cavity Mold Apart

Lee built these blocks with steel bushings and alignment pins, which keeps the two halves lined up precisely pour after pour. That consistency is what gives you uniform bullets across all six cavities instead of weight scatter. The aluminum construction also runs about a third the weight of comparable iron molds, so your hands and arms hold up better during longer casting sessions.

Cam Operated Sprue Plate on the Lee 90741

One of the nicer touches here is the cam operated sprue plate. It cuts out the repetitive mallet pounding you deal with on ordinary molds, so opening the sprue is smoother and easier on the mold over time. The plate itself is hard anodized and held down with tempered wave washers at each end, which keeps tension even and the action clean through thousands of cycles.

Getting Set Up to Cast With the 90741

This mold ships as the block set only, so you will need a set of Lee six cavity mold handles to open and close it, and most casters pair it with a bullet sizing kit to bring the finished bullets to final diameter. Once you have the handles and a pot of alloy going, this mold really shines for anyone building up a stockpile of 7.62×39 plinking and practice loads without the per round cost of factory projectiles.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90741
  • UPC: 734307907419
  • Mold Series: C312-155-2R
  • Caliber: 7.62x39mm
  • Cavities: 6
  • Bullet Weight: 155 grain
  • Bullet Diameter: .312 inch
  • Bullet Style: Round Nose, 2 Ogive Radius, Gas Check
  • Ballistic Coefficient: .268
  • Block Material: Machined Aluminum
  • Sprue Plate: Hard Anodized, Cam Operated
  • Finish: Silver
  • Quantity: 1

What’s Included

  • Lee Precision 90741 six cavity mold block set (handles sold separately)

Frequently Asked Questions

Does the Lee Precision 90741 mold come with handles?

No, the 90741 ships as the mold block set only. You will need a set of Lee six cavity mold handles, part number 90005, to open and close it. Most casters also add a bullet sizing kit to bring the finished bullets to final diameter.

What bullet does the 90741 six cavity mold produce?

This mold drops a .312 diameter, 155 grain round nose bullet with a two ogive radius and a gas check design. Each pour fills all six cavities at once, which makes it well suited for high volume casting. The finished bullet is designed around the 7.62x39mm cartridge.

Can I use the Lee 90741 bullets in an AK or SKS?

Yes, the .312 diameter 155 grain projectile is a common choice for 7.62×39 rifles like the AK platform and the SKS. Many casters slug their barrel first to confirm the right final diameter, then size accordingly. Pairing the gas check design with a proper alloy helps keep leading down at higher velocities.

Why choose an aluminum mold like the 90741 over iron?

Lee machines these blocks from aluminum, which heats up and cools down faster than iron or steel, so you can usually produce good bullets after just a few casts. The aluminum also runs about a third the weight of comparable iron molds, which cuts down on hand fatigue during long sessions. The steel bushings and alignment pins keep the blocks lined up for consistent bullets.

Additional information

UPC

734307907419

Manufacturer

Manufacturer Part Number

90741

Bullet Weight (Grains)

155

Caliber/Gauge

7.62 x 39mm

Capacity

6 Bullets

Grains

.155 Grain

Product Type

6 Cavity

Quantity

1

Shipping Weight

1.2

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 90741 Six Cavity Mold 7.62x39mm 155gr .312”