0
0

Lee Precision Factory Crimp Die 6.5 Creedmoor – 90704

UPC: 734307907044

$12.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Crimping has a reputation for being the fussy last step on the loading bench, but Lee's Factory Crimp Die takes the guesswork right out of it. Instead of relying on a traditional roll crimp that depends on perfect case length, this die uses a collet that squeezes the case mouth inward from the sides. That means your 6.5 Creedmoor rounds get the same firm, even crimp whether your brass is trimmed dead-on or runs a touch long, and buckling a case is close to impossible.

How the 6.5 Creedmoor Factory Crimp Die Works

The magic is in that collet. As you run a loaded round up into the die, four segments close in on the case mouth and press it into a crimp, forming a groove even on bullets that don't have a cannelure. It's a straight, segmented crimp rather than the rolled-over edge you get from older-style dies, and it grips hard enough to keep bullets locked in place through recoil, magazine feeding, and rough handling in the field.

Why Reloaders Reach for This Lee Crimp Die

There's a real performance reason beyond just holding the bullet. A firm crimp forces pressure to build to a higher level before the bullet starts moving, and that higher start pressure tends to smooth out your pressure curve and shrink velocity spread from shot to shot. Lee's own testing has shown that even bullets with no crimp groove can shoot tighter groups when crimped this way. For a long-range favorite like the 6.5 Creedmoor, that kind of consistency is exactly what you're chasing.

Setting Up the Lee 6.5 Creedmoor Crimp Die

This one threads into the standard 7/8-14 station on any common single-stage or progressive press, and it goes to work after sizing, priming, and bullet seating. Treat it as the final step on each round. The body is steel and no shell holder is needed for the crimping operation, so it drops right into your existing 6.5 Creedmoor die lineup without any fuss.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90704
  • UPC: 734307907044
  • Caliber: 6.5mm Creedmoor
  • Product Type: Factory Crimp Rifle Die
  • Die Type: Crimp
  • Die Series: Factory Crimp
  • Crimp Style: Collet-style segmented crimp
  • Material: Steel
  • Thread Size: 7/8-14
  • Shell Holder Included: No
  • Storage Box Included: Yes

What’s Included

  • Lee Factory Crimp Die, 6.5 Creedmoor
  • Plastic storage box
  • Instruction sheet

Frequently Asked Questions

Do my bullets need a cannelure to use the Lee Factory Crimp Die in 6.5 Creedmoor?

No. The collet in this die squeezes hard enough to form a crimp into the case mouth even on bullets with no crimp groove. That makes it a great fit for the smooth-jacketed match bullets a lot of 6.5 Creedmoor handloaders run.

Will this crimp die fit my reloading press?

It uses the standard 7/8-14 thread, so it threads into any common single-stage or progressive press station. Most reloaders add it as the fourth station on a progressive or run it as a separate final step on a single-stage press.

Where does the Factory Crimp Die go in my loading process?

Save it for last. After you've sized, primed, charged, and seated the bullet, run the completed round through this die to apply the crimp. No shell holder is required for the crimping operation itself.

Can I adjust how much crimp this die applies?

Yes. You set crimp pressure by how far you thread the die body down into the press, so you can dial in anything from a light touch to a firm hold. Start light and work up until you get the grip and consistency you're after.

Additional information

UPC

734307907044

Manufacturer

Manufacturer Part Number

90704

Caliber/Gauge

6.5mm Creedmoor

Length

4.9000

Product Type

Factory Crimp Rifle Die

Shipping Weight

1.0125

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Factory Crimp Die 6.5 Creedmoor – 90704”