Description
The Lee 90702 Collet 2-Die Set is built for the handloader chasing accuracy out of their .220 Swift. Instead of pushing the neck through a conventional sizing ring, the collet die uses a steel collet to squeeze the case neck against a central precision mandrel. That approach creates a straight, concentric neck with minimal runout and keeps the inside diameter consistent from the seated bullet's standpoint. Because you're only working the neck, there's no case lube to apply or wipe off afterward.
How the 90702 Collet Die Keeps Your .220 Swift Brass Alive
Neck sizing only preserves the fire-formed fit of your brass to your chamber, which is why these dies are a favorite among bolt gun target reloaders. Since the brass isn't being stretched and drawn like it is with full length sizing, your cases tend to last considerably longer and need less frequent trimming. The tradeoff is that this set is meant for brass fired in your own rifle, and it's really in its element in a bolt action rather than autoloaders, pump, or lever guns.
What Comes in the Lee .220 Swift Collet Set
This is a complete 2-die package. You get the collet neck sizing die with its decapping mandrel, the Easy Adjust Dead Length bullet seating die, a shell holder sized for the .220 Swift, a powder dipper, charge data, and a storage box. The dead length seater is the key to its repeatability. It seats to a fixed depth so you can dial bullets in close to the lands for consistent shot-to-shot start pressure. Both dies use the standard 7/8-14 thread, so they drop right into any common single stage or turret press.
Getting the Most From the 90702 Collet Die
A handy trick with these dies is to size, back the case out slightly, rotate it an eighth of a turn, and size again. That lets the collet petals hit the high spots of the neck for a rounder result and a touch more bullet tension. Go light on press pressure since it takes very little movement to change neck tension, and you'll be rewarded with brass that chambers smooth and shoots tight.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90702
- Model Number: LP90702
- UPC: 734307907020
- Caliber: .220 Swift
- Product Type: Collet 2-Die Neck Sizing Set
- Number of Dies: 2
- Die Types: Collet Neck Sizer, Dead Length Bullet Seater
- Thread Size: 7/8-14
- Shellholder Included: Yes
- Material: Hardened Steel
- Country of Origin: USA
What’s Included
- Collet neck sizing die with decapping mandrel
- Easy Adjust Dead Length bullet seating die
- Shell holder (.220 Swift)
- Powder dipper
- Charge data table
- Storage box
Frequently Asked Questions
Do I need case lube with the Lee 90702 Collet Die?
No. The collet die sizes only the neck by squeezing it against a precision mandrel, so there's no lube to apply or clean off. That saves a step and keeps your cases clean and ready to prime and charge.
Is this Collet 2-Die Set good for my autoloader or lever gun?
This set is designed for brass that's been fired in your own rifle and really shines in bolt actions used for target work. Lee does not recommend neck sizing dies for autoloaders, pump, or lever action guns since those actions generally need the fuller fit that full length sizing provides.
Does the Lee .220 Swift Collet Set include a crimp die?
No, this is a 2-die set with a collet neck sizer and a dead length bullet seater. The seater is built for accuracy by setting a fixed seating depth rather than crimping, so if you want a factory crimp you'd add that die separately.
Will the 90702 dies fit my press?
Yes. Both dies use the industry standard 7/8-14 thread, so they'll thread into any common single stage or turret press. A press that cams over at the top of the stroke works especially well with the collet design.




Reviews
There are no reviews yet.