$19.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Case trimming is one of those reloading chores nobody looks forward to, and that's exactly where the Lee Deluxe Power Quick Trim earns its keep. This powered version of Lee's Quick Trim system uses a hex shank that snaps straight into a cordless screwdriver or drill (sold separately), so instead of hand-cranking case after case, you let the tool do the work. Drop in a sized case, run the cutter, and it trims to length while chamfering and deburring the inside and outside of the case mouth all in the same motion. No calipers, no measuring, no separate chamfer step.
The trimmer itself isn't caliber-specific, but it does need a Quick Trim die (sold separately) to work. The die threads into any reloading press that takes standard 7/8-14 dies, holds your brass secure, and sets the trim length. That means there are no collets to fuss with and no pilots to swap or lose. One trimmer body covers every caliber you load for, as long as you've got the matching die for each cartridge. A click-adjustable stop lets you fine-tune trim length in .001 inch increments, so you can even shorten cases a touch below standard to stretch out the time between trimmings.
Reloaders who run the powered setup consistently point to how much faster it is than doing trim, chamfer, and deburr as three separate operations. The cutter leaves a clean, square case mouth, and the design keeps the pilot-free system from scuffing up the inside of your necks. One tip worth passing along from folks who use it: keep the shavings cleared out as you go for the most consistent results, and don't run it faster than 1200 RPM so the spring-loaded chamfer cutters stay happy.
The kit ships with the power Quick Trim adapter, a snap-on chip catcher to keep your bench tidy, and the deluxe cutter assembly. Add a Quick Trim die for each cartridge you load and you've got a fast, no-nonsense brass prep station that lives right in your press.
The trimmer body itself isn't caliber-specific, but it needs a Quick Trim die for each cartridge you load, and those are sold separately. The die holds the case and sets the trim length. One trimmer covers all your calibers as long as you have the matching die for each one.
The power adapter has a hex shank that snaps into a cordless screwdriver or drill, which is sold separately. Keep the speed under 1200 RPM since the chamfer cutters are spring loaded and don't like being spun too fast. You can also use the standard hand-turn setup if you'd rather not run power.
It's a press-mounted system. The Quick Trim die threads into any reloading press that takes standard 7/8-14 dies, so there are no collets or pilots to deal with. You hold the case up in the die with the ram, then run the cutter to trim, chamfer, and deburr in one motion.
Yes. The click-adjustable stop lets you fine-tune the trim length in .001 inch increments, which means you can shorten cases a bit below standard. Running them slightly shorter stretches out the time between trimmings, which is handy for calibers that grow quickly.
| UPC | 734307906702 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 90670 |
| Caliber/Gauge | Multi-Caliber |
| Color | DELUXE QUICK POWER TRIMMER |
| Length | 3.7500 |
| Product Type | Case Trimmer |
| Quantity | 2 Piece |
| Shipping Weight | 0.21 |
You must be logged in to post a review.
Reviews
There are no reviews yet.