Description
If you run a Lee case-activated powder measure and want to charge rifle brass without juggling extra steps, the Lee Short Charging Die 90668 is the piece that ties it all together. It mounts in your press and lets the Auto-Disk, Pro Auto-Disk, or Auto-Drum drop a measured charge right through the die as the case rises into it. Think of it as the rifle cousin to the powder-through expanding die from Lee's handgun sets, with one key difference: it charges the case but leaves the mouth alone.
How the Short Charging Die Fits Your Lee Setup
This die works with cases from .860 to 1.760 inches long, which covers the range from .22 Hornet up to .223 Remington. Lee calls for bullet diameters of .223 and larger here, since smaller diameters run into powder bridging through the drop tube. If your brass runs longer than 1.760 inches, that is where the Long Charging Die steps in, so match the die to your case length and you are set.
Why the Short Charging Die Skips the Flare
Unlike a pistol powder-through die, this one does not expand or flare the case mouth. That job stays with your rifle sizing die, which already handles neck expansion for bottleneck brass. Keeping those tasks separate means you get a clean, consistent powder drop without over-working the brass, and reloaders running progressive presses like the Pro 1000 or LoadMaster appreciate how it automates the charging station.
The die itself is steel with standard 7/8-14 threads, so it threads into any common reloading press without adapters. It ships in a plastic storage box to keep it protected on the bench. Keep in mind a shellholder is sold separately, so grab the correct one for your cartridge if you do not already have it on hand.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90668
- UPC: 734307906689
- Product Type: Short Charging Die
- Compatible Measures: Auto-Disk, Pro Auto-Disk, Auto-Drum
- Case Length Range: 0.860" to 1.760"
- Caliber Range: .22 Hornet to .223 Remington
- Bullet Diameter: .223 and larger
- Thread Size: 7/8"-14
- Material: Steel
- Number of Dies: 1
- Carbide: No
- Shellholder Included: No
- Storage Box Included: Yes
What’s Included
- Lee Short Charging Die (90668)
- Plastic storage box
Frequently Asked Questions
What powder measures does the Lee Short Charging Die work with?
It is designed to work with the Lee Auto-Disk, Pro Auto-Disk, and Auto-Drum powder measures. You mount the die in your press and the measure drops a charge through it as the case rises. It is the rifle counterpart to the powder-through expanding die found in Lee handgun die sets.
Does the Short Charging Die flare the case mouth like a pistol die?
No, it does not expand or flare the case mouth. That step is handled by your rifle sizing die, which takes care of neck expansion on bottleneck brass. This die simply charges the case with powder as part of the sequence.
What case lengths and calibers does the 90668 cover?
It fits cases from .860 to 1.760 inches long, roughly the span from .22 Hornet up to .223 Remington. Lee specifies bullet diameters of .223 and larger to avoid powder bridging in the drop tube. For brass longer than 1.760 inches, you would use the Lee Long Charging Die instead.
Is a shellholder included with the Lee Short Charging Die?
No, a shellholder is sold separately, so you will want to have the correct one for your cartridge. The die ships with a plastic storage box to keep it protected on the bench. It uses standard 7/8-14 threads, so it fits common reloading presses without any adapters.




Reviews
There are no reviews yet.