Description
If you load .40 S&W or 10mm Auto on a turret or progressive press, this Lee Precision Powder Through Expanding Die earns its spot in the toolhead fast. It handles two jobs at once by flaring the case mouth so a bullet starts clean while dropping the powder charge through the center of the die. That combo frees up a station and smooths out your rhythm, which matters a lot once you're running hundreds of rounds in a sitting.
How the Lee Powder Through Expanding Die Works
The design lets powder travel straight through the die body while the expander flares the mouth. You can run it with the included powder funnel adapter and a hand dipper, or swap in a Lee Auto Disk, Pro Auto Disk, or Auto Drum measure for automatic charging on every pull of the handle. It's a Lee signature feature, and it's the reason a lot of folks stick with their system once they get it dialed in.
Build and Fitment on the .40 S&W Expander Die
Machined from hardened steel and made in the USA, the body uses the standard 7/8"-14 thread, so it threads into any common single stage, turret, or progressive press. Keep in mind the shellholder is sold separately, so grab the right one for the .40 S&W / 10mm family if you don't already have it. The die ships in a storage container to keep it organized on the bench between sessions.
Getting the Most Out of This Lee Pistol Die
Setup is quick. Adjust the expander depth to give just enough flare to seat a bullet without working the brass harder than it needs. Dialed in right, you get consistent case prep and a reliable powder drop in one motion, which is a real time saver for high volume pistol shooters feeding a .40 or 10mm diet.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90620
- UPC: 734307906207
- Caliber: .40 S&W / 10mm Auto
- Product Type: Powder Through Expanding Pistol Die
- Material: Hardened Steel
- Thread Size: 7/8"-14
- Shellholder Included: No
- Country of Origin: USA
- Length: 4.7 in
What’s Included
- Lee Powder Through Expanding Die (.40 S&W / 10mm Auto)
- Powder funnel adapter
- Storage container
Frequently Asked Questions
What does the Lee Powder Through Expanding Die do?
It flares the case mouth so a bullet seats cleanly while letting the powder charge drop straight through the die body. That means you handle expanding and charging at one station instead of two. It's a big time saver on turret and progressive presses.
Will this die work for both .40 S&W and 10mm Auto?
Yes. The 90620 expanding die is set up for the .40 S&W / 10mm Auto case family, since both share the same case diameter. One die covers both cartridges on the bench.
Do I need a separate powder measure to use it?
You can run it with the powder funnel adapter and a hand dipper, or mount a Lee Auto Disk, Pro Auto Disk, or Auto Drum measure on top for automatic charging. The automatic route is the popular choice for anyone loading in volume. Either way, powder feeds through the die while the mouth is being expanded.
Is a shellholder included with this Lee die?
No, the shellholder is sold separately. You'll want the correct shellholder for the .40 S&W / 10mm Auto head size if you don't already have one in your kit.



Reviews
There are no reviews yet.