Description
If you handload the 9.3×62 Mauser, the Lee Factory Crimp Die is one of those tools that quietly makes your ammo better. Instead of relying on a traditional roll crimp, this die uses a collet that gently squeezes the case mouth into the bullet from all sides. The result is a firm, even crimp that holds the bullet securely, which matters a lot in a big-bore hunting cartridge that sees heavy recoil and rough field handling.
What the 9.3×62 Factory Crimp Die Does for Your Loads
A firm crimp does more than just keep bullets from walking under recoil. Pressure has to build to a higher level before the bullet starts to move, and that higher start pressure leads to a more uniform pressure curve and less velocity variation from shot to shot. Lee's own testing has shown that even bullets without a cannelure or crimp groove tend to shoot more accurately when crimped with this die. It also makes powder selection a little less fussy, which is handy when you're working up a load for a 9.3.
Why the Collet Crimp Beats a Roll Crimp
Because the collet applies even pressure around the whole case mouth, it's nearly impossible to buckle or crush a case the way you sometimes can with a standard roll crimp die. That's a big deal with longer bottleneck rifle brass. You get a straight, segmented crimp that looks and performs like factory ammo, and you can fine-tune the amount of crimp to match your load.
Fitment and Build
This die is built from steel and comes packaged in a plastic storage box to keep it clean on the shelf. It uses the standard 7/8-14 thread, so it threads right into any common single-stage or turret press. Keep in mind the die is sold on its own and does not include a shell holder, so make sure you've got the correct one on hand for the 9.3×62 before your next loading session.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90610
- UPC: 734307906108
- Cartridge: 9.3×62 Mauser
- Die Type: Factory Crimp Die
- Crimp Style: Collet / segmented straight crimp
- Thread: 7/8-14
- Material: Steel
- Number of Dies: 1
- Country of Origin: United States
What’s Included
- Lee 9.3×62 Factory Crimp Die
- Plastic storage box
- Instructions
Frequently Asked Questions
Does the 9.3×62 Factory Crimp Die come with a shell holder?
No, the shell holder is sold separately with this die. You'll want to pick up the correct shell holder for the 9.3×62 Mauser before you start loading. Many reloaders already have one from their sizing and seating die set.
Will this die work on my press?
Yes. The Lee Factory Crimp Die uses the standard 7/8-14 thread, so it fits common single-stage, turret, and progressive presses. Just thread it in like any other standard die.
Can I use the Factory Crimp Die on bullets without a cannelure?
Absolutely. One of the nice things about the collet design is that it crimps the case mouth into the bullet whether or not there's a crimp groove. Lee's testing even shows that bullets without a cannelure can shoot more accurately when crimped this way.
Why use a crimp die on a big-bore rifle round like the 9.3×62?
A firm crimp keeps bullets seated under heavy recoil and rough handling in the field, which is exactly what a 9.3×62 hunting load sees. It also helps produce a more uniform pressure curve and less velocity variation, which can tighten up your groups.




Reviews
There are no reviews yet.