Description
The 5.7x28mm has a reputation for being an expensive round to feed, which is exactly why a lot of folks turn to reloading it. The Lee Full Length 2-Die Set (MPN 90603) hands you the core tools to do it: a full length sizing die and a bullet seating die machined from steel and honed to a smooth finish. It threads into any standard 7/8-14 press, so whether you're running a single stage or a progressive, these drop right in.
What the Lee 5.7x28mm 2-Die Set Does
The sizing die works the full length of the case, bringing fired brass back to spec so your rounds chamber cleanly and your brass lasts longer. The bullet seating die sets your projectile to your chosen overall length and gives the case mouth a light crimp in the same stroke. Between the two, you've got everything needed to turn once-fired or new brass into loaded ammo for range work and practice.
Notes Worth Knowing on the 5.7×28 Dies
This is a steel die set, so case lube is part of the process. Lee specifically calls for their resizing lubricant with this set, and the 5.7 case rewards a careful, even lube job more than most. The 5.7x28mm brass runs soft, and the rims can be finicky. Lee recommends their FN shell holder (sold separately, #92183) for resizing because the softer rims can deform in a standard universal holder. The included universal shell holder covers general handling, but if you're sizing a lot of brass, the FN holder is worth adding to the bench.
In the Box with the Lee Full Length 2-Die Set
Alongside the two dies, the set ships with a universal shell holder, a powder dipper for measuring charges, and printed instructions with load data to get you started. Lee backs these with a two year warranty and a guarantee of accuracy. For anyone looking to take the cost sting out of shooting 5.7, this is a straightforward, proven way to get rolling.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90603
- UPC: 734307906030
- Caliber: 5.7x28mm
- Product Type: Full Length
- Number of Dies: 2
- Die Material: Steel
- Carbide: No
- Thread Size: 7/8-14
- Case Lube Required: Yes
- Warranty: 2-year guarantee with accuracy guarantee
- Length: 4.8 in
- Shipping Weight: 0.94 lb
What’s Included
- Full Length Sizing Die
- Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
Frequently Asked Questions
Do I need case lube to use the Lee 5.7x28mm die set?
Yes. This is a steel die set, not carbide, so cases need to be lubricated before sizing. Lee specifically recommends their own resizing lubricant for this set, and a careful, even application goes a long way with 5.7 brass since the cases can be touchy during sizing.
Does the Lee 5.7×28 2-Die Set come with a shell holder?
It does. A universal shell holder is included in the box along with the two dies, a powder dipper, and load data. Keep in mind that current 5.7×28 brass runs soft, and Lee suggests their separate FN shell holder (#92183) for resizing because the softer rims can deform in a standard universal holder.
Will these dies fit my reloading press?
Yes. These dies use the standard 7/8-14 thread, so they fit common presses from Lee, RCBS, Hornady, Lyman, Dillon, and others. They work on single stage and progressive setups alike.
Does this set include a factory crimp die?
No. This is a two-die set with a full length sizing die and a bullet seating die, and the seating die applies a light crimp as it seats the bullet. If you want a dedicated factory crimp die, that would be a separate purchase.



Reviews
There are no reviews yet.