Description
If you shoot the .45-70 Government and want to feed it on your own terms, the Lee Precision 459-500-3R mold is a proven way to get there. This double cavity mold produces a .459 diameter, 500-grain round nose bullet with a solid base, which is right in the sweet spot for the big-bore cartridge. Handles come with it, so there's no hunting down a separate set before your first casting session. Each bullet runs about 1.415 inches overall, with the first lube groove sitting .685 inches back from the nose, and the design carries a ballistic coefficient around .443.
What the 459-500-3R Mold Brings to the Bench
Lee machines these blocks from aluminum, which is a deliberate choice. Aluminum heats up and cools down quicker than iron or steel, so you can start pulling good bullets after just a handful of casts instead of waiting around for the blocks to come up to temperature. The cavities are lathe-bored for roundness and consistent sizing, and casters have noted how close the two cavities run to each other in finished weight, often less than a grain apart. That kind of consistency matters when you're loading for a rifle you plan to shoot at distance.
Casting with the Lee Double Cavity 500gr Mold
The double cavity layout lets you drop two bullets per pour, which speeds things up nicely over a single cavity when you're building a batch. Aluminum blocks weigh roughly a third of what iron blocks do, so your arm holds up better through a long session. These are precision tools though, softer than steel, so they appreciate gentle handling and will reward you with a long working life. The deep grease grooves hold plenty of lube, which plays well with black powder and smokeless loads alike.
Most casters will want to pair this mold with a proper sizing die to bring the as-cast bullets to final diameter before loading. It's a popular setup among .45-70 reloaders and black powder cartridge folks who want a heavy, accurate bullet without paying commercial cast prices every time they want to shoot.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90577
- Model: 459-500-3R
- UPC: 734307905774
- Caliber: .45-70 Government
- Bullet Diameter: .459 inch
- Bullet Weight: 500 grain
- Bullet Profile: Round Nose
- Cavities: Double (2)
- Block Material: Aluminum
- Bullet Overall Length: 1.415 inches
- Nose to First Lube Groove: .685 inches
- Ballistic Coefficient: .443
- Handles: Included
- Country of Origin: United States
What’s Included
- Lee 459-500-3R double cavity mold blocks
- Mold handles
- Sprue plate
Frequently Asked Questions
What cartridge is the Lee 459-500-3R mold made for?
This mold is designed for the .45-70 Government, producing a .459 diameter, 500-grain round nose bullet. The heavy weight and solid base make it a favorite among .45-70 and black powder cartridge reloaders. It works for both black powder and smokeless loads once you've sized the bullets.
Do I need to buy handles separately for this Lee mold?
No, the handles are included with the 459-500-3R mold. You're ready to start casting right out of the box without tracking down a separate handle set.
Do I need a sizing die to use the bullets from this mold?
It's a good idea. Most casters run the as-cast bullets through a sizing die to bring them to a consistent final diameter before loading, which improves fit and accuracy. A proper Lee sizing kit for your press type is sold separately.
Why does Lee use aluminum blocks instead of steel?
Aluminum heats up and cools down faster than iron or steel, so you can produce good bullets after just a few casts. The blocks also weigh about a third of what iron blocks do, which cuts down on arm fatigue during long casting sessions. Just handle them with care, since aluminum is softer than steel.



Reviews
There are no reviews yet.