Description
The Lee Pacesetter 3-Die Set in .300 AAC Blackout covers the full handloading cycle from spent brass to finished round. You get a full-length sizing die, the Easy Adjust Dead Length Bullet Seating Die, and the Lee Factory Crimp Die, plus a universal shell holder, powder dipper, and instructions with load data. The dies are machine honed to a smooth finish so cases glide in and out without drama, and the whole set stores neatly in its own box. If you're forming .300 Blackout from cut-down .223/5.56 brass or loading from dedicated .300 BLK cases, this set handles both.
What Each Die in the Pacesetter Set Does
The full-length sizing die resizes the entire case back to spec, pushes out the spent primer, and sets up the neck for a new bullet. Case lube is needed here. The Easy Adjust Dead Length Bullet Seating Die is the heart of the set for consistency: it seats bullets to a repeatable overall length and does not crimp, which keeps runout low and seating depth uniform. A floating seater stem lets the bullet self-align as it goes into the case mouth.
Why the Factory Crimp Die Earns Its Spot
The collet-style Lee Factory Crimp Die is a favorite among semi-auto and AR builders for good reason. Instead of a traditional roll crimp that pushes down and can buckle a case, this die squeezes the case mouth inward from four sides for a firm, uniform grip. It works with or without a cannelure and is relatively forgiving of small case-length differences, though trimming to spec is still smart practice. That consistent neck tension is exactly what you want feeding through a magazine and cycling an AR-pattern rifle.
Built for Everyday .300 Blackout Reloading
Made from steel and backed by Lee's reputation for value, this Pacesetter set gives new and experienced handloaders a straightforward path to reliable subsonic and supersonic .300 Blackout loads. Set them up per the included directions, give them a quick cleaning out of the box, and you're ready to run.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90575
- UPC: 734307905750
- Caliber: .300 AAC Blackout (also fits .300 Whisper)
- Die Series: Pacesetter
- Die Type: Full Length 3-Die Set
- Dies In Set: 3
- Material: Steel
- Shell Holder: Included
- Gun Type: Rifle
- Seating Die: Easy Adjust Dead Length Bullet Seating Die
- Crimp Die: Collet-Style Factory Crimp Die
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
- Plastic Storage Box
Frequently Asked Questions
Is the Lee Pacesetter .300 Blackout set a 2-die or 3-die set?
This is a true 3-die set. It includes a full-length sizing die, the Easy Adjust Dead Length Bullet Seating Die, and the Factory Crimp Die. Some older listings caused confusion by describing a 2-die version, but 90575 ships with all three dies plus the shell holder and powder dipper.
Can I use this set to form .300 Blackout brass from .223 or 5.56 cases?
Yes, many handloaders use these dies to convert cut-down .223/5.56 brass into .300 Blackout, and they work well for that job. You'll still need to trim the shortened brass to proper length before sizing and loading. The set also works with factory .300 Blackout and .300 Whisper cases.
Does the dead length seating die crimp the bullet?
No, the Easy Adjust Dead Length Bullet Seating Die only seats the bullet to a consistent overall length and does not crimp. That's by design, since a separate step keeps seating depth and runout tight. Crimping is handled by the included collet-style Factory Crimp Die as its own operation.
Why does the Factory Crimp Die matter for .300 Blackout in an AR?
The collet-style Factory Crimp Die squeezes the case mouth inward from four points for a firm, even grip without buckling the case. That consistent neck tension helps rounds feed reliably from the magazine and cycle through a semi-auto action. It also works with bullets that lack a cannelure, which gives you more bullet options.





Reviews
There are no reviews yet.