Description
The .300 Winchester Magnum earns its keep in the field, and loading your own gives you room to tune a round to your rifle and your game. The Lee Pacesetter 3-Die Set covers the whole job in one package, built from steel and machine honed to a smooth finish that keeps brass flowing through the dies without drama.
What the Lee Pacesetter .300 Win Mag Set Does
You get three dies that handle the full cycle. The Full Length Sizing Die resizes fired brass back to spec, expands the case mouth, and knocks out the spent primer, which is the right call for hunting ammo that has to chamber cleanly in any .300 Win Mag. The Easy Adjust Dead Length Bullet Seating Die sets your bullet to a consistent depth with a simple finger adjustment and works with just about any bullet profile you throw at it. Rounding things out is the Lee Factory Crimp Die, a collet-style crimper that squeezes a clean, even crimp whether or not your cases are trimmed to matching lengths.
Why Reloaders Reach for the Pacesetter 3-Die Set
That Factory Crimp Die is the piece folks tend to talk about. It locks the bullet in place firmly, helps guard against setback under recoil, and tends to tighten up velocity consistency shot to shot, which is exactly what you want behind a hard-recoiling magnum headed on a hunt. It is also forgiving to set up, so newer reloaders get repeatable results without a lot of fiddling.
Loaded and Ready in the Red Box
Lee packs more into this kit than the dies alone. The appropriate universal shell holder, a powder dipper, and printed load data and instructions all come tucked in Lee's signature red storage box, so you have reference numbers and a starting point the moment you sit down at the bench. It runs on standard 7/8-14 thread presses, meaning it drops into just about any single stage or turret setup you already own.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90539
- UPC: 734307905392
- Caliber: .300 Winchester Magnum
- Product Type: Pacesetter Rifle Dies w/Shell Holder
- Die Set: 3-Die Set
- Dies Included: Full Length Sizing, Dead Length Bullet Seating, Factory Crimp
- Thread: 7/8-14
- Material: Hardened Steel
- Shell Holder: Included
- Country of Manufacture: United States
- Warranty: 2 Year Lee Precision Guarantee
- Shipping Weight: 1.3 lbs
What’s Included
- Full Length Sizing Die
- Easy Adjust Dead Length Bullet Seating Die
- Lee Factory Crimp Die
- Universal Shell Holder
- Powder Dipper
- Load Data and Instructions
- Red plastic storage box
Frequently Asked Questions
What dies come in the Lee Pacesetter .300 Win Mag 3-Die Set?
The set includes a Full Length Sizing Die, an Easy Adjust Dead Length Bullet Seating Die, and the Lee Factory Crimp Die. The sizer resizes fired brass and removes the spent primer, the seater sets your bullet depth, and the crimp die finishes the round with a clean, even crimp. Lee also tosses in the correct shell holder, a powder dipper, and load data.
Do I need a separate shell holder for this set?
No. The matching universal shell holder for .300 Winchester Magnum is included in the box, so you are ready to start sizing and loading without a separate purchase. Case lube is still required when running brass through the full length sizing die.
Will these dies fit my press?
Yes, they use the industry-standard 7/8-14 thread, so they thread into just about any common single stage or turret press. That makes the Pacesetter set an easy drop-in whether you are running a basic beginner press or a more established bench setup.
Is the Lee Factory Crimp Die worth using on .300 Win Mag loads?
Many reloaders lean on it for magnum hunting ammo because it applies a consistent crimp even when case lengths vary slightly, and it helps keep bullets from shifting under heavy recoil. The collet-style crimp is known for being easy to set up and tough to over-crimp. It is a nice-to-have that tends to tighten up shot-to-shot consistency on bottleneck rifle rounds.



Reviews
There are no reviews yet.