0
0

Lee Precision Pacesetter 3-Die Set 7mm Rem Mag

UPC: 734307905385

$41.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision Pacesetter 3-Die Set for 7mm Remington Magnum is a great starting point for anyone loading this flat-shooting magnum, whether it's for long-range hunting or just stretching your ammo budget. This is the set a lot of folks consider the sweet spot in Lee's rifle lineup: you get the three dies that handle the whole job, plus the small extras that get you rolling the same day it shows up.

Inside the box you'll find a full length sizing die with a decapping rod and expander, an Easy Adjust Dead Length bullet seating die, and the Lee Factory Crimp Die. The full length sizer brings fired brass back to factory dimensions and knocks out the spent primer, which is the right call when you're loading cases that came from different rifles or bouncing between guns. The dead length seater makes setting your bullet depth straightforward, and the Factory Crimp Die puts a clean, segmented crimp on the case mouth that mimics factory ammo and helps keep bullets from backing out under recoil.

Why Shooters Reach for the Lee Pacesetter 7mm Rem Mag Set

The Factory Crimp Die is the real standout here. It's widely regarded as the most effective way to crimp a bottleneck rifle cartridge, and a good crimp often tightens up groups while keeping rounds reliable in the field. For a hard-recoiling magnum like the 7mm Rem Mag, that extra bite on the bullet is worth having.

Fitment and Setup for the Pacesetter 3-Die Set

These dies use the standard 7/8 by 14 thread, so they'll thread right into common single stage and turret presses from Lee, RCBS, Hornady, Lyman, Dillon, and others. One thing worth knowing: the full length steel sizing die needs case lube to run smoothly and avoid stuck cases, so keep a tube or pad of resizing lubricant on the bench. The set also includes a universal shell holder, a powder dipper, and instructions with load data, so you've got the reference material and the hardware to start working up loads right away.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90538
  • UPC: 734307905385
  • Caliber: 7mm Remington Magnum
  • Product Type: Pacesetter Rifle Dies w/ Shell Holder
  • Dies in Set: 3
  • Die Series: Pacesetter
  • Material: Steel
  • Thread Size: 7/8 x 14
  • Shell Holder: Included
  • Case Lube: Required for full length sizing
  • Country of Origin: United States

What’s Included

  • Full Length Sizing Die
  • Easy Adjust Dead Length Bullet Seating Die
  • Factory Crimp Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions with load data

Frequently Asked Questions

Do I need case lube with the Lee Pacesetter 7mm Rem Mag die set?

Yes. The full length sizing die is steel, not carbide, so you'll want to lube your cases before running them through to size smoothly and avoid a stuck case. A bottleneck magnum like the 7mm Rem Mag needs that lubrication every time you full length size. Lee resizing lubricant or any quality case lube does the job.

Will these dies fit my press?

They use the standard 7/8 by 14 thread, which is the common size for rifle dies. That means they'll thread into single stage and turret presses from Lee, RCBS, Hornady, Lyman, Dillon, and most other makers. You won't need any special adapter for a standard press.

What does the Factory Crimp Die do in this set?

The Lee Factory Crimp Die applies a segmented, straight crimp to the case mouth that closely matches factory ammunition. It's considered one of the most effective ways to crimp a bottleneck rifle round and helps keep bullets seated under recoil. Many loaders find it also tightens up accuracy, and it works as a separate step from seating.

Does the Pacesetter 3-Die Set include a neck sizing die?

No. This set includes the full length sizing die, the dead length bullet seater, and the Factory Crimp Die. If you want a collet neck sizing die for single-rifle precision work, you'd need the Ultimate 4-Die Set instead. The Pacesetter is built around full length sizing, which is the right choice for loading brass fired in more than one rifle.

Additional information

UPC

734307905385

Manufacturer

Manufacturer Part Number

90538

Caliber/Gauge

7mm Remington Magnum

Product Type

Pacesetter Rifle Dies w/Shell Holder

Shipping Weight

0.9875

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Pacesetter 3-Die Set 7mm Rem Mag”