Description
If you shoot .44 Special or .44 Magnum and want to start rolling your own, this Lee set is one of the easiest ways in. The carbide full-length sizing die is the star here. Because the sizing ring is carbide, you skip the case lube step entirely, which means no greasy fingers, no tumbling cases a second time to clean lube off, and a faster trip from spent brass to loaded round. Lee grinds the carbide insert to a special contour, so you don't get that objectionable belt mark on the case that cheaper carbide dies tend to leave behind.
What the Lee .44 Carbide Die Set Actually Does
The three dies cover the full pistol reloading cycle. You get the carbide full-length sizing die with decapping unit, a powder-through expanding die that bells the case mouth and lets you drop your charge in the same stroke using an auto-disk measure or the included dipper, and a bullet seating die that handles seating and crimp together. The seating die gives you an adjustable crimp that runs anywhere from a slight taper to a full roll, which is handy when you're loading heavier Magnum rounds that benefit from a firm roll crimp to keep bullets from walking under recoil.
Loading .44 Special and .44 Magnum With One Set
One set covers both cartridges since they share the same bullet diameter and case design, with the Magnum just running a longer case. That makes this a smart buy if you own a .44 Magnum revolver and like shooting lighter .44 Special loads for practice or plinking. Load data for both is readily available in reloading manuals, and these dies will also handle .445 Super Mag if you ever head that direction.
Why Reloaders Keep Coming Back to Lee Dies
Lee has built a reputation on dies that work and don't cost a fortune, and plenty of longtime reloaders will tell you their Lee gear has run trouble-free for decades. The dies thread into pretty much any standard single-stage, turret, or progressive press, and everything stows in a fitted storage box so your set stays organized on the bench. For a first-time loader or someone adding a new caliber, it's a no-fuss starting point.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90516
- UPC: 734307905163
- Caliber: .44 Special / .44 Magnum
- Product Type: Carbide
- Dies In Set: 3
- Die Material: Carbide
- Gun Type: Handgun / Revolver
- Shell Holder: Included
- Case Lube Required: No
- Crimp Type: Adjustable, slight taper to full roll
- Country of Origin: United States
- Shipping Weight: 1.1375 lb
What’s Included
- Carbide Full Length Sizing Die with decapping unit
- Powder Through Expanding Die
- Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions and load data
- Fitted plastic storage box
Frequently Asked Questions
Does the Lee Carbide 3-Die Set load both .44 Special and .44 Magnum?
Yes. The two cartridges use the same bullet diameter and case design, with the Magnum simply running a longer case, so this single set handles both. It will also load .445 Super Mag if you shoot that round, with load data available from your powder manufacturer.
Do I need case lube with these carbide dies?
No. The carbide sizing ring lets you resize brass without any case lubrication, which saves you the extra step of lubing cases and cleaning the lube off afterward. That is one of the main reasons reloaders reach for carbide pistol dies.
What kind of crimp does the seating die put on?
The bullet seating die gives you an adjustable crimp that ranges from a light taper all the way to a full roll crimp. For heavier .44 Magnum loads, a firm roll crimp helps keep bullets seated against recoil. Keep in mind seating and crimping happen in the same die, so take a little care dialing it in.
Will this set work with my reloading press?
The dies use standard threads and fit nearly any common single-stage, turret, or progressive press. A universal shell holder is included in the set. Everything stores in a fitted box so it stays together between loading sessions.




Reviews
There are no reviews yet.