0
0

Lee Carbide 3-Die Set .38 Special / .357 Magnum – 90510

UPC: 734307905101

$34.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Lee's Carbide 3-Die Set is one of the most popular ways to get into loading .38 Special, and it earns that reputation by keeping things simple. The carbide full-length sizing die is the star here. Because the sizing ring is solid carbide, you skip the case lube step entirely, which is a real time saver on straight wall pistol brass. Lee grinds that carbide insert to a special contour so it won't leave the belt mark on your cases that you sometimes see with ordinary carbide dies.

What Comes in the Lee .38 Special Die Set

You get three dies that cover the whole process: the carbide full-length sizing die, a powder through expanding die, and a bullet seating die. The powder through expander flares the case mouth and lets you drop your charge right through the die using a Lee Auto-Disk measure or the included dipper. The seating die handles bullet seating and crimping together, and the crimp is adjustable from a slight taper all the way to a full roll. Everything rides on standard 7/8-14 threads, so it fits any common single stage, turret, or progressive press.

Running .357 Magnum with the Lee Carbide Set

Here's a handy bonus a lot of folks don't realize at first. This .38 Special set will also load .357 Magnum and .357 Maximum. You just back the powder through expanding die and the seating die out about two turns to account for the longer case. Load data for .38 Special comes in the box, and you'll want a reloading manual like Lee's Modern Reloading for the magnum and maximum numbers.

Built to Last

Lee designs these dies to run for years. The decapper is tough to break thanks to a built-in failsafe, the bullet seater floats to help keep bullets straight, and there's an integrated stuck case remover if you ever need it. The finger-adjustable locking rings make setup and tweaks quick, and when you're done everything tucks back into the plastic storage box. For anyone loading revolver rounds on a budget without giving up quality, this set is a proven workhorse.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90510
  • UPC: 734307905101
  • Caliber: .38 Special / .357 Magnum
  • Product Type: Carbide 3-Die Set, Pistol
  • Dies in Set: 3
  • Sizing Die Material: Steel with carbide insert
  • Die Thread: 7/8-14
  • Shell Holder: Included
  • Crimp Type: Adjustable, slight taper to full roll
  • Case Lube Required: No
  • Country of Origin: United States

What’s Included

  • Carbide full-length sizing die
  • Powder through expanding die
  • Bullet seating die with adjustable crimp
  • Universal shell holder
  • Powder dipper
  • Load data and instructions
  • Plastic storage box

Frequently Asked Questions

Do I need case lube with the Lee Carbide 3-Die Set?

No, you don't. The carbide sizing ring glides over straight wall .38 Special and .357 brass without any lubricant, so you can size cases right out of the tumbler. That saves you the messy lube step and the cleanup that comes with it.

Can this .38 Special set also load .357 Magnum?

Yes. The same dies will load .38 Special, .357 Magnum, and .357 Maximum since the cartridges share bullet and case diameter. You just back out the powder through expanding die and the seating die about two turns to make room for the longer magnum case. Load data for .38 Special is in the box, but you'll want a reloading manual for the magnum numbers.

Will this die set fit my press?

It should fit just about any standard press. These dies use the common 7/8-14 thread, so they thread right into single stage, turret, and progressive presses. The included shell holder matches the .38 Special and .357 case head.

Does the seating die crimp the bullet too?

It does. The bullet seating die seats and crimps in the same stroke, and the crimp is adjustable anywhere from a light taper to a full roll crimp. Roll crimping into the cannelure is popular for revolver rounds to help keep bullets from walking under recoil.

Additional information

UPC

734307905101

Manufacturer

Manufacturer Part Number

90510

Caliber/Gauge

.357 Magnum

Length

4.9000

Product Type

Carbide 3-Die Set Pistol

Shipping Weight

1.1625

Reviews

There are no reviews yet.

Be the first to review “Lee Carbide 3-Die Set .38 Special / .357 Magnum – 90510”