0
0

Lee Precision Carbide 3-Die Set .45 GAP – 90498

UPC: 734307904982

$34.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision Carbide 3-Die Set in .45 GAP is a complete handgun die set built around the Glock Auto Pistol cartridge, giving you the tools to size, charge, flare, seat, and crimp without piecing together dies one at a time. Lee uses a solid carbide insert in the sizing die, ground to a special contour that avoids leaving the belt mark on the case that you'll find with some ordinary carbide dies. The big upside of that carbide sizer is you skip the case lube step entirely, which keeps brass prep fast and your hands a lot less greasy.

What Sets This .45 GAP Die Set Apart

The powder-through expanding die is the clever piece of this setup. The case neck gets expanded and flared through a hollow plug, which lets you charge powder at the same time using an auto-disk measure or the included dipper. Lee designed the expander to flare the minimum amount needed for easy bullet insertion, and all of that flare gets removed again during bullet seating. That approach cuts out the need for a separate taper crimp die for most loads.

Dialing In the Lee Carbide 3-Die Set

The bullet seating die handles seating and crimping in one stroke, with an adjustable crimp that ranges from a slight taper all the way to a full roll. Because seating and crimping happen together, it pays to take your time dialing in the seat and crimp die the first time around. Running a quality-controlled source of brass, like cases fired only in your own gun, keeps things consistent, and watching bullet diameter matters when you're not leaning on a factory crimp die.

Lee has built these dies in the USA for a long time, and reloaders consistently note they thread right into other brands of presses without any fuss. For anyone shooting .45 GAP and tired of factory ammo availability, this set is a straightforward way to take control of your supply.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90498
  • UPC: 734307904982
  • Caliber: .45 GAP
  • Product Type: Carbide 3-Die Set Pistol
  • Number of Dies: 3
  • Material: Steel with Carbide Insert
  • Shell Holder: Included (Universal)
  • Country of Origin: United States
  • Shipping Weight: 1.15 lb

What’s Included

  • Carbide Full-Length Sizing Die
  • Powder-Through Expanding Die
  • Bullet Seating Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions / Load Data
  • Storage Container

Frequently Asked Questions

Do I need case lube with the Lee Carbide 3-Die Set for .45 GAP?

No. The carbide sizing insert lets you resize straight-wall .45 GAP brass without any case lube, which is one of the main reasons reloaders reach for carbide pistol dies. That saves you a step in brass prep and keeps cleanup minimal. You don't even need to clean your cases before sizing.

Will these dies work for .45 ACP?

No. This set is cut specifically for the .45 GAP cartridge, which has a shorter case than .45 ACP. For .45 ACP you'll want a die set labeled for that caliber.

Does the Lee .45 GAP set include a separate crimp die?

The bullet seating die handles both seating and crimping in the same operation, with an adjustable crimp that goes from a slight taper to a full roll. Because Lee's expander only flares the case the minimum amount, the seating die removes that flare, so a separate taper crimp die isn't required for most loads. If you want a dedicated crimp operation, Lee offers a Factory Crimp Die for .45 GAP separately.

Will this set fit presses other than Lee?

Yes. These dies use the standard 7/8-14 thread and reloaders report they thread right into RCBS and other brand presses without any issues. The included shell holder is a universal fit for common single-stage and turret presses.

Additional information

UPC

734307904982

Manufacturer

Manufacturer Part Number

90498

Caliber/Gauge

.45 GAP

Product Type

Carbide 3-Die Set Pistol

Shipping Weight

1.15

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Carbide 3-Die Set .45 GAP – 90498”