Description
The Lee 30 M1 Carbine Powder Thru Expanding Die handles two jobs at once. As the case rises into the die, the hollow expander plug flares the mouth of your .30 Carbine brass so bullets start straight, and because it is hollow, a powder measure mounts right on top and drops your charge through the die at the same time. It is the kind of smart, no fuss setup that makes loading pistol-style straight wall rounds like the .30 Carbine go a lot faster.
This die uses the industry standard 7/8-14 thread, so it screws into any Lee press as well as other brands built to that spec. You can run it on a single stage, a turret, or a progressive without trouble. To make the powder drop work, you pair it with a Lee Auto Disk, Pro Auto Disk, or Auto Drum powder measure, which sits on top and cycles as the case operates the plug. If you would rather measure your charges by hand, the powder funnel adapter lets you use a powder dipper instead.
Setting Up the 30 M1 Carbine Powder Thru Die
Setup is straightforward. Raise your shell holder to the top of the stroke, thread the die down until it touches, then back it out about a quarter turn to dial in the amount of flare you want. A light flare is all you need to seat bullets without shaving or crimping the mouth. When you attach your powder measure, make sure it is snug so the expander plug stays put and keeps your flare consistent round after round.
What This Lee Powder Thru Expander Does for Your Reloads
This is the same powder through die that comes in Lee's 3-die .30 Carbine sets, so if you already own a set and need a spare or a replacement, this is the exact part. It is a standard steel die rather than carbide, so a light pass through a case lube step keeps things smooth. For folks loading .30 Carbine in volume, combining the flare and charge into one stroke is a genuine time saver.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90494
- UPC: 734307904944
- Caliber: .30 Carbine (30 M1)
- Die Type: Powder Through Expanding Die
- Thread Size: 7/8-14
- Material: Steel (non-carbide)
- Length: 4.75 in
- Shellholder Included: No
What’s Included
- Lee 30 M1 Carbine Powder Through Expanding Die
- Storage case
Frequently Asked Questions
Do I need a powder measure to use the 30 M1 Carbine Powder Thru Die?
To drop powder through the die automatically, yes, you pair it with a Lee Auto Disk, Pro Auto Disk, or Auto Drum powder measure that mounts on top. If you prefer to measure charges by hand, you can swap in the powder funnel adapter and use a powder dipper instead. Either way, the die still flares the case mouth on every stroke.
Will this die fit presses other than Lee?
Yes. It uses the standard 7/8-14 thread, which is the industry spec, so it threads into Lee presses and any other brand built to that same standard. You can run it on a single stage, turret, or progressive press.
Is a shell holder included with the Lee 30 M1 Carbine Powder Thru Die?
No, the shell holder is sold separately. You will want the correct shell holder for the .30 Carbine case head to run this die. It ships as a single die with a storage case.
Is this the same powder through die that comes in the Lee .30 Carbine 3-die set?
It is. Lee includes a powder through expanding die in their 3-die .30 Carbine sets, and this is that exact component sold on its own. It is a handy pickup if you need a spare or a replacement without buying a whole new set.




Reviews
There are no reviews yet.