0
0

Lee 90465 Six Cavity Bullet Mold – 9mm .356 124gr Round Nose

UPC: 734307904654

$48.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 90465 six cavity mold is the workhorse for anyone who wants to stop buying bullets and start making them. It drops six .356 diameter, 124 grain round nose bullets per pour, which makes short work of filling ammo cans for 9mm Luger, 38 Super Auto, and 380 Auto. This is the TL356-124-2R design with a two radius ogive, so the bullets feed smooth and fly true in just about any semi-auto you point them at.

What Sets the Lee 90465 Mold Apart

Lee builds these blocks from commercial quality aluminum, and that choice pays off at the casting bench. Aluminum heats up and cools down faster than iron or steel, so you can usually start dropping good bullets after just a few pours instead of babysitting a cold mold. It won't rust like cast iron, and it weighs about a third of what a steel block does, which your wrist and forearm will thank you for during a long casting session. The cavities are lathe bored for tight roundness and consistent sizing, and the mold rides on steel bushings and alignment pins to keep the halves locking up the same way every time.

Casting Volume With the Six Cavity Setup

Stepping up from a two or four cavity block to six cavities is a real jump in output, and it's the main reason folks reach for this one. More cavities per pour means more finished bullets per pot of lead, so you spend less time casting and more time at the range. The mold comes with a cam operated, hard anodized sprue plate held tight by tempered spring washers on each end, which makes cutting the sprue quick and keeps your rhythm going.

A Few Things to Know Before You Cast

Handles are sold separately and you'll need a set to run this mold, so grab a pair if you don't already have Lee six cavity handles on the bench. You'll also want a .356 sizing and lube setup, or you can powder coat and size the bullets yourself, which is a popular route for plinking loads. Temperature control is the name of the game with aluminum blocks, so give it a little time to come up to heat and you'll be rewarded with clean, well filled bullets.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90465
  • Model: TL356-124-2R
  • UPC: 734307904654
  • Cavities: 6
  • Bullet Diameter: 0.356 in
  • Bullet Weight: 124 Grains
  • Bullet Style: Round Nose, 2-Radius Ogive
  • Compatible Cartridges: 9mm Luger, 38 Super Auto, 380 Auto
  • Block Material: Aluminum
  • Sprue Plate: Cam operated, hard anodized
  • Country of Manufacture: United States

What’s Included

  • Lee 90465 six cavity aluminum mold block
  • Cam operated hard anodized sprue plate

Frequently Asked Questions

Does the Lee 90465 six cavity mold come with handles?

No, handles are sold separately and are required to run the mold. You'll want a set of Lee six cavity mold handles to operate it safely and comfortably. If you already cast with other Lee six cavity blocks, your existing handles will work here.

What cartridges can I load with the bullets from this mold?

The mold drops a .356 diameter, 124 grain round nose bullet that works for 9mm Luger, 38 Super Auto, and 380 Auto. The two radius ogive gives it a smooth profile that feeds well in most semi-autos. It's a solid all around choice for plinking and practice loads.

Do I need a sizer and lube with the Lee six cavity mold?

Yes, sizing and lube equipment is sold separately and sized for the .356 diameter bullet. Many casters either run a Lee sizing and lube kit or powder coat the bullets and size them afterward. Either way, plan on a sizing step before loading.

Why choose an aluminum mold over steel or cast iron?

Aluminum heats up and cools down faster, so you can start dropping good bullets after just a few pours. It also resists rust and weighs about a third of what a steel block does, which cuts down on fatigue during long casting sessions. The tradeoff is that temperature management matters more, so give it a little time to find its rhythm.

Additional information

UPC

734307904654

Manufacturer

Manufacturer Part Number

90465

Bullet Weight (Grains)

124

Caliber/Gauge

380 Caliber

Shipping Weight

0.7

Color

6-CAVITY

Length

12.9000

Reviews

There are no reviews yet.

Be the first to review “Lee 90465 Six Cavity Bullet Mold – 9mm .356 124gr Round Nose”