0
0

Lee Precision TL452-200-SWC Double Cavity Bullet Mold .452 200gr

UPC: 734307904630

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Lee Precision's TL452-200-SWC double cavity mold, the go-to block for anyone casting 200-grain semi-wadcutters for the big-bore .45 crowd. It drops a .452 diameter bullet that feeds right into .45 ACP, .45 Colt, .45 Auto Rim, and even .45 Schofield, which makes it one of the more versatile molds to keep on the bench. The blocks are CNC machined from aluminum and come with the steel handles permanently attached, so there's nothing extra to buy before you start pouring.

The "TL" in the name is the detail worth paying attention to. This is the tumble lube version, meaning the bullet shank carries a series of shallow micro grooves instead of one big lube groove. That design holds Lee's Liquid Alox style lube beautifully, so you can skip the lube-sizer and just tumble your cast bullets in a container, let them dry, and load. It's a huge time saver if you're pumping out range ammo in volume.

Why the TL452-200-SWC Earns Its Spot

Aluminum blocks are the whole reason reloaders reach for Lee molds. They heat up and cool down faster than iron or steel, which gets you to good, frosty bullets quicker and cuts down on arm fatigue during long casting sessions. The cavities can't rust, and the semi-wadcutter nose with its sharp shoulder cuts clean holes in paper, which is exactly what you want for target and plinking loads. The bullet runs .585 inches overall with a ballistic coefficient right around .127.

Getting the Most From Your .452 200gr Mold

Like any aluminum mold, this one rewards a gentle break-in. Give the cavities a wash to strip any machining oil, dry them fully, and bring the blocks up to temperature before expecting pretty bullets. The first few casts are usually throwaways while things get hot and seasoned. After that, most bullets drop at or very near .452 and can be loaded as-cast without sizing. Treat the blocks kindly, avoid prying the sprue plate with anything metal, and this mold will put out bullets for a very long time.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90463
  • UPC: 734307904630
  • Model: TL452-200-SWC
  • Bullet Diameter: .452 inch
  • Bullet Weight: 200 Grains
  • Bullet Style: Semi-Wadcutter (SWC), Tumble Lube
  • Cavities: Double (2)
  • Caliber Fit: .45 ACP, .45 Auto Rim, .45 Colt, .45 Schofield
  • Block Material: CNC Machined Aluminum
  • Handles: Steel, permanently attached
  • Bullet Overall Length: .585 inches
  • Ballistic Coefficient: .127

What’s Included

  • Lee TL452-200-SWC double cavity bullet mold
  • Attached steel mold handles

Frequently Asked Questions

What calibers can I load with the Lee TL452-200-SWC mold?

This mold casts a .452 diameter 200-grain semi-wadcutter that works across the common .45 bore cartridges. That includes .45 ACP, .45 Auto Rim, .45 Colt, and .45 Schofield. It's one reason this block is such a popular all-rounder for .45 shooters.

Does this mold come with handles, or do I need to buy them separately?

The steel handles are included and permanently attached to the blocks, so you can start casting right out of the box. That's different from Lee's six-cavity molds, where handles are sold separately. Just bring your lead pot and sprue setup and you're ready to go.

What does the "TL" tumble lube design mean for this mold?

The tumble lube bullet has several shallow micro grooves on the shank instead of one deep lube groove. That lets you coat the bullets by tumbling them in a liquid lube, letting them dry, and loading without a lube-sizer. It's a fast, low-equipment way to finish cast bullets in volume.

Do bullets from this mold need to be sized before loading?

Most bullets drop at or very close to .452 straight from the cavities, so sizing is usually not required. Once your mold is up to temperature and broken in, the bullets come out consistent and ready to lube and load. If your particular alloy casts a touch oversized, a sizer die can bring them to spec.

Additional information

UPC

734307904630

Manufacturer

Manufacturer Part Number

90463

Bullet Weight (Grains)

200

Caliber/Gauge

.45 Caliber

Shipping Weight

0.8438

Reviews

There are no reviews yet.

Be the first to review “Lee Precision TL452-200-SWC Double Cavity Bullet Mold .452 200gr”