0
0

Lee Precision Pro 4000 Shell Plate #12 – 7.62×39, 6.5 Grendel

UPC: 734307904142

$19.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision Pro 4000 Shell Plate #12 is the piece that lets your progressive press hold and index cases for the 7.62x39R and 6.5 Grendel family. If you already run a Lee Auto Breech Lock Pro or the Pro 4000 kit, this is the exact plate you reach for when you want to load those cartridges, since the press only accepts Lee's own breech lock shell plates and nothing else. It's machined from steel and carries the part number 90414, following the same numbering as Lee's Universal Shell Holders, so a #12 here fits the same case heads you'd expect from a #12 holder.

What the #12 Plate Covers

This plate is set up for 7.62x39R and 6.5 Grendel, and reloaders have found it works for the handful of cartridges sharing that case head, including 6mm ARC and 6mm PPC. That makes it a handy plate to have on the bench if you load modern mid-size rifle rounds on a Lee progressive. The case rim seats into the plate pockets and gets carried station to station as the plate rotates clockwise through sizing, powder, seating, and crimp.

Fitting the Shell Plate on Your Pro 4000

Swapping plates is quick once you've done it once. You raise the carrier partway, drop the new plate on, and lightly snap it down clockwise with a 1/4 inch hex key before reinstalling the index rod and case ejector. Lee built the Auto Breech Lock Pro and Pro 4000 around fast caliber changes, and having the right dedicated plate for each cartridge is what makes that quick changeover actually happen without fuss.

Keep in mind this is a Breech Lock Pro / Pro 4000 part specifically. It will not drop into a Lee Pro 1000, Load-Master, or Six Pack Pro press, since each of those platforms uses its own plate design. Match the press and you're good to go.

Key Specifications

  • Brand: Lee Precision
  • Model: Pro 4000 Shell Plate #12
  • Manufacturer Part Number: 90414
  • UPC: 734307904142
  • Shell Plate Size: #12
  • Compatible Cartridges: 7.62x39R, 6.5 Grendel
  • Material: Steel
  • Compatible Presses: Lee Auto Breech Lock Pro / Pro 4000
  • Press Type: Progressive
  • Shipping Weight: 0.26 lbs

What’s Included

  • Lee Precision Pro 4000 Shell Plate #12 (one shell plate)

Frequently Asked Questions

What cartridges does the Pro 4000 Shell Plate #12 work with?

The #12 plate is set up for 7.62x39R and 6.5 Grendel. Because those cartridges share a case head with a few others, reloaders have also run it for 6mm ARC and 6mm PPC. Any round that uses a Lee #12 shell holder head size should seat into this plate.

Will this shell plate fit my Lee Pro 1000 or Load-Master press?

No. This is a dedicated Breech Lock Pro / Pro 4000 shell plate and only fits the Lee Auto Breech Lock Pro and Pro 4000 presses. The Pro 1000, Load-Master, and Six Pack Pro each use their own plate design, so you'll want to match the plate to your specific press.

How do I install the #12 shell plate on my Pro 4000?

Raise the carrier to about mid-stroke, set the new plate on, and lightly tighten it clockwise with a 1/4 inch hex key. You'll pull the index rod and case ejector to swap plates, then reinstall them once the plate is seated. The press is designed for quick caliber changes, so once you've done it a time or two it's a fast job.

Is the Lee Pro 4000 Shell Plate #12 the same part as the Auto Breech Lock Pro plate?

Yes. Lee markets the same plate under both the Auto Breech Lock Pro and Pro 4000 names since the Pro 4000 kit is built on the Auto Breech Lock Pro press. Part number 90414 covers both, so you're looking at the identical component either way.

Additional information

UPC

734307904142

Manufacturer

Manufacturer Part Number

90414

Shipping Weight

0.26

Reviews

There are no reviews yet.

Be the first to review “Lee Precision Pro 4000 Shell Plate #12 – 7.62×39, 6.5 Grendel”