Description
The Lee Precision C457-500-F is built for folks who run a .45-70 and want to feed it heavy cast bullets without paying premium prices per box. This double cavity mould drops a .457 diameter, 500 grain round flat nose bullet, which is the classic heavyweight load that the .45-70 was built around back in the day. Those big flat nose slugs hit hard and shoot flat enough for the ranges most lever gun and single shot owners care about.
What the C457-500-F Casts
This is a gas check design, so the bullet carries a shank at the base meant to seat a .458 gas check before sizing. That gas check helps keep your bore clean at higher velocities and makes a real difference if you like pushing your loads a bit harder. The finished bullet runs 1.205 inches in overall length with a single lube groove, and it's a proven performer for black powder and smokeless loads alike. Folks who cast with it regularly report tack driving accuracy once they get their alloy and lube sorted out.
Why Reloaders Reach for This Lee Mould
Lee machines the blocks from aluminum, which heats up quickly and gets you casting good bullets sooner than heavier steel moulds. The two cavities double your output per pour, so a casting session goes faster when you need to build up a stash of 500 grain bullets. The cavities are CNC machined for roundness and consistent sizing, and the whole thing is cast, machined, and assembled in the USA.
Steel handles come in the box, so there's nothing extra to buy before your first casting run. Keep in mind the weights Lee lists are based on their suggested alloy, so your actual bullet weight will shift a little depending on the lead mix you run. Pair it with a Lee sizing die and your gas checks and you've got everything you need to keep that .45-70 fed.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90376
- Model: C457-500-F Double Cavity Mould
- UPC: 734307903763
- Bullet Diameter: .457 inch
- Bullet Weight: 500 Grains
- Bullet Style: Round Flat Nose, Gas Check
- Caliber: .45-70 Government
- Number of Cavities: 2
- Block Material: Aluminum
- Bullet Overall Length: 1.205 inches
- Lube Groove Distance (from nose): .605 inches
- Handles Included: Yes
- Country of Origin: United States
What’s Included
- Lee Precision C457-500-F double cavity bullet mould
- Steel mould handles
Frequently Asked Questions
Does the C457-500-F bullet require a gas check?
Yes, this mould is a gas check design, so the bullet base is cut to seat a .458 gas check. Running the gas check helps keep your bore clean and lets you push the load to higher velocities without leading issues. Many casters seat the check on a Lee sizing die during the sizing step.
What caliber is this Lee mould meant for?
It casts a .457 diameter, 500 grain flat nose bullet built around the .45-70 Government. The same bullet also works for related big bore cartridges like the .45-90 WCF and .45-90 Sharps. Always check your reloading manual for the right load data before you start.
Does the C457-500-F come with handles?
It does. Steel handles are included in the box, so you can start casting without buying anything extra up front. You'll still want a lead pot, a gas check seater or sizer, and your bullet lube to complete the setup.
Will my bullets actually weigh exactly 500 grains?
Not always, and that's normal. Lee bases the 500 grain figure on their suggested alloy, so your real weight shifts a bit depending on the lead mix you cast with. Casters commonly report weights landing a few grains under or over, which is typical and nothing to worry about.





Reviews
There are no reviews yet.