Description
The Lee Precision C309-200-R is a double cavity mould built to cast a .309 diameter, 200 grain round nose bullet, a classic weight and profile for .30 caliber rifle work. It drops two bullets per pour, which keeps a casting session moving without jumping into the cost of a six cavity setup. The profile pairs well with cartridges like the .30-30, .308 Winchester, and .30-06, making it a solid pick for plinking, practice, and working up affordable cast loads.
What Sets the C309-200-R Mould Apart
Lee machines these mould blocks from aluminum rather than iron or steel, and that choice pays off at the bench. The blocks heat up and cool down quickly, so you get good, filled-out bullets after only a few throwaway casts, and they weigh roughly a third of what steel blocks do, which means less wrist fatigue during a long run. Aluminum also won't rust the way cast iron can, so the cavities stay clean with basic care. Each cavity is CNC machined for tight roundness and consistent sizing, and many reloaders run these bullets as cast without needing to size them.
Casting with the Lee .309 200 gr Mould
This is a gas check design, which gives you flexibility. You can run the bullet with a gas check for higher velocity loads or shoot it plain base for lighter, slower loads. Like any new aluminum mould, it benefits from a gentle break-in: a quick cleaning to strip any machining oil, then a few warm-up casts to bring it up to temperature. Once it's hot and seasoned, fill-out gets noticeably better and bullets release cleaner.
Keep in mind this mould handles the casting side of the job only. It does not include sizing or lubing equipment, so if your load calls for sized and lubed bullets you'll want to add a lube and size kit in the matching .309 diameter. For reloaders who want quality cast bullets without a big investment, the C309-200-R is a dependable, no-nonsense tool.
Key Specifications
- Manufacturer: Lee Precision
- Model: C309-200-R
- Manufacturer Part Number: 90370
- UPC: 734307903701
- Bullet Diameter: .309"
- Bullet Weight: 200 Grain
- Caliber: .30 Caliber
- Bullet Profile: Round Nose
- Cavities: Double (2)
- Base Type: Gas Check
- Block Material: Aluminum, CNC Machined
- Country of Origin: Made in USA
What’s Included
- Lee C309-200-R double cavity bullet mould blocks
- Mould handles
- Sprue plate
- Instructions
Frequently Asked Questions
What cartridges will the Lee C309-200-R mould work for?
It casts a .309 diameter, 200 grain round nose bullet that suits common .30 caliber rifle cartridges, including the .30-30, .308 Winchester, and .30-06. Always confirm your load against a current reloading manual for the specific cartridge you're building. Bullet weight can vary slightly depending on the alloy you cast with.
Does the C309-200-R mould need a gas check?
This is a gas check design, so you have options. You can seat a gas check for higher velocity loads or run the bullet plain base for lighter loads. It comes down to the velocity and accuracy you're after.
Does this Lee .309 200 gr mould come with everything I need to cast?
The mould ships with the aluminum blocks, handles, and sprue plate, so you're ready to cast right out of the box. It does not include sizing or lubing equipment. If your loads call for sized and lubed bullets, you'll want to add a lube and size kit in .309 diameter separately.
Why does Lee use aluminum blocks for this mould?
Aluminum heats and cools faster than iron or steel, so you get good, filled-out bullets after only a few warm-up casts. The blocks are also about a third of the weight of steel, which cuts down on fatigue during longer sessions, and they won't rust. Each cavity is CNC machined for consistent roundness and sizing.





Reviews
There are no reviews yet.