Description
Loading for the .50 Action Express gets a whole lot more practical with the Lee Precision Steel 3-Die Set. The .50 AE is one of the biggest autoloading handgun rounds out there, and factory ammo isn't cheap, so rolling your own is a smart move for anyone feeding a Desert Eagle, a Magnum Research BFR, or another big-bore chambered for it. This set gives you the three core operations handled right on the press: full-length sizing and decapping, powder-through case mouth expanding, and bullet seating with a built-in crimp.
What the Lee .50 AE Steel 3-Die Set Covers
The steel full-length sizing die resizes and deprimes fired brass in one stroke. Since this is a steel sizer and not carbide, your cases need a wipe of case lube before they go in, and a cleaning afterward. The powder-through expanding die opens and flares the case mouth so bullets start straight, and it lets you drop powder through the die in the same step if you're running a progressive or turret setup. The bullet seating die seats to your chosen depth and can be adjusted to roll a taper crimp, so there's no need to buy a separate crimp die for this round.
Why Reloaders Reach for the Lee Steel 3-Die Set
Lee grinds its sizer to a special contour that skips the belt mark ordinary steel dies can leave on a case. The dies use the standard 7/8-14 thread, so they thread right into Lee, RCBS, Hornady, Lyman, Dillon, and other common presses. The .50 AE runs at serious pressures and generates real recoil, so careful case prep and working loads up slowly pays off. The included instructions and load data give you a solid starting point, and the fitted box keeps the whole set organized on the bench.
This is the straightforward, no-nonsense way to start handloading a cartridge that can be tough and pricey to find on store shelves.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90329
- UPC: 734307903299
- Caliber: .50 Action Express
- Product Type: Steel 3-Die Set, Pistol
- Dies In Set: 3 (Full-Length Sizing, Powder-Through Expanding, Bullet Seating)
- Die Material: Steel
- Shell Holder: Universal Shell Holder included
- Thread Size: 7/8-14
- Case Lubrication: Required (steel sizing die)
- Country of Origin: United States
- Shipping Weight: 1.1 lbs
What’s Included
- Steel Full-Length Sizing Die
- Powder-Through Expanding Die
- Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
- Fitted storage box
Frequently Asked Questions
Does the Lee .50 AE Steel 3-Die Set require case lube?
Yes. Because the full-length sizing die is steel rather than carbide, you need to lubricate your brass before sizing and clean the cases afterward. A thin, even coat of case lube keeps sizing smooth and helps prevent stuck cases. Lee's resizing lubricant works well for this.
Do I need a separate crimp die with this set?
No. The bullet seating die can be adjusted to apply a taper crimp as you seat, which is the correct crimp style for the .50 AE since it headspaces on the case mouth. That keeps the set self-contained for standard loading. If you want to separate seating and crimping, a dedicated crimp die is available separately.
Will these dies fit my reloading press?
They should. The dies use the industry-standard 7/8-14 thread, so they thread into common single-stage, turret, and progressive presses from Lee, RCBS, Hornady, Lyman, and Dillon. The included Universal Shell Holder is sized for the .50 AE rim, which shares its diameter with the .44 Magnum.
What firearms is this .50 Action Express die set good for?
Anything chambered in .50 AE. The cartridge is best known in the Magnum Research Desert Eagle, but it also shows up in revolvers like the Magnum Research BFR and Freedom Arms Model 83. If you load for a Desert Eagle, keep an eye on overall length and work loads up carefully, since some lighter charges won't reliably cycle the gas-operated action.



Reviews
There are no reviews yet.