0
0

Lee Precision 358-105-SWC Double Cavity Bullet Mould .358″ 105gr

UPC: 734307903169

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a lot of .38 Special or .357 Magnum and you're tired of paying for lead, casting your own is one of the most satisfying ways to stretch your range budget. The Lee Precision 358-105-SWC Double Cavity Mould drops a .358-inch, 105-grain semi-wadcutter bullet, a lighter SWC that's a favorite for soft-shooting target loads and plinking. The semi-wadcutter nose cuts clean holes in paper and feeds well, which is a big part of why this profile has stayed popular with revolver and lever gun crowds for decades.

What the Lee 358-105-SWC Mould Casts

This mould produces a .358 diameter 105 grain semi-wadcutter bullet with an overall length right around .510 inches and a ballistic coefficient of .106. It's a great fit for .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum, and plenty of folks run these through a 9mm Luger too once sized properly. The double cavity design lets you drop two bullets per pour, which really adds up over a casting session compared to a single cavity.

Why Casters Like the Lee Precision Aluminum Mould

Lee machines the blocks from aluminum, so they won't rust, they come in at about a third the weight of iron or steel blocks, and they heat up and cool down faster. That faster thermal cycle means you're usually dropping good bullets after just a few throwaway casts. The cavities are machined for tight roundness and size control, and most Lee bullets can be used as cast without extra sizing. A hard anodized sprue plate and tangential cut-off help keep a clean base on every bullet.

The steel handles are already attached and ready to go, so you can get to work without hunting down extra parts. Aluminum is a bit softer than blued steel, so treat it gently during break-in and it'll pour good bullets for a long time. A quick smoke of the cavity with a match or butane lighter before your first session helps fill-out and bullet release.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90316
  • UPC: 734307903169
  • Bullet Diameter: .358 inch
  • Bullet Weight: 105 grains
  • Bullet Style: Semi-Wadcutter (SWC)
  • Number of Cavities: Double (2)
  • Block Material: Aluminum
  • Bullet Overall Length: .510 inch
  • Ballistic Coefficient: .106
  • Gas Check: No (plain base)
  • Compatible Cartridges: .38 Special, .38 S&W, .38 Colt New Police, .357 Magnum
  • Handles Included: Yes
  • Shipping Weight: 0.875 lb

What’s Included

  • Lee Precision 358-105-SWC double cavity aluminum bullet mould
  • Attached steel mould handles
  • Sprue plate
  • Instruction sheet

Frequently Asked Questions

What cartridges does the Lee 358-105-SWC mould work with?

It casts a .358 diameter 105 grain semi-wadcutter that's suited to .38 Special, .38 S&W, .38 Colt New Police, and .357 Magnum. Many casters also run these in a 9mm Luger once they're sized to the right diameter for their bore. It's a versatile profile for anyone loading the .38/.357 family.

Do I need to buy handles separately for this mould?

No, the handles are included and permanently attached, so the mould is ready to use out of the box. You'll still want a melting pot, a ladle or furnace, and your lead alloy to get started. Some reloaders also add a bullet sizer and lube depending on their setup.

Does the Lee 358-105-SWC bullet take a gas check?

No, this is a plain base design with no gas check. That keeps it simple and cost-effective for the lower to moderate velocities these light .38 and .357 loads typically run. Just match your alloy hardness to your load for the best results.

Why is Lee's mould made from aluminum instead of steel?

Aluminum won't rust, weighs about a third of what iron or steel blocks weigh, and heats up and cools down faster, so you're dropping good bullets quicker and with less arm fatigue during long sessions. The trade-off is that aluminum is a bit softer, so it rewards gentle handling. Break it in carefully and smoke the cavity before your first pour and it'll last for years.

Additional information

UPC

734307903169

Manufacturer

Manufacturer Part Number

90316

Bullet Weight (Grains)

105

Caliber/Gauge

.357 Caliber

Shipping Weight

0.875

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 358-105-SWC Double Cavity Bullet Mould .358″ 105gr”