Description
The Lee Precision TL314-90-SWC is a double cavity bullet mold that drops .314 inch, 90 grain semi-wadcutter bullets, and it's a favorite for folks loading the older 32 caliber cartridges. It covers 32-20 WCF, 32 S&W Long, and 32 Colt New Police, so if you've got a classic revolver or lever gun chambered in one of those, this mold keeps you feeding it without hunting down hard-to-find factory projectiles. The TL in the name stands for tumble lube, meaning the bullet is grooved to hold tumble-style lubricant, which skips the mess and extra tooling of traditional lube-sizing for a lot of casters.
What Makes the TL314-90-SWC Mold Tick
Lee machines the blocks from aluminum, which is the heart of why these molds are so popular. Aluminum heats up and cools down faster than steel or iron, so you spend less time waiting for the mold to come up to temperature and more time dropping good bullets. The lighter weight also means less arm fatigue during a long casting session. The cavities are CNC machined for solid roundness and consistent sizing, and the semi-wadcutter nose cuts clean holes in paper, which makes this a good match for target and plinking loads.
Casting With the Lee 90311 Double Cavity Mold
Being a double cavity, this mold doubles your output per pour compared to a single cavity block, a nice bump in productivity without jumping up to a six cavity setup. Many Lee bullets can be used as cast without sizing, though checking your diameter against your barrel is always smart. Aluminum runs softer than blued steel, so it pays to treat the mold gently and give it a proper break-in. A wash to remove any machining residue, then smoking the cavities before your first session, helps the bullets release cleanly and fill out right from the start.
This one comes ready to run with the handles and sprue plate included, so you're not chasing down extra parts before your first casting session. It's a straightforward, well-proven tool for anyone keeping a 32 caliber classic fed.
Key Specifications
- Manufacturer: Lee Precision
- Model: TL314-90-SWC
- Manufacturer Part Number: 90311
- UPC: 734307903114
- Bullet Diameter: .314 in
- Bullet Weight: 90 grains
- Bullet Profile: Semi-Wadcutter (Tumble Lube)
- Caliber: 32 Caliber
- Cartridges: 32-20 WCF, 32 S&W Long, 32 Colt New Police
- Cavities: 2 (Double Cavity)
- Block Material: Machined Aluminum
- Sprue Plate: Hard Anodized
- Country of Origin: United States
- Shipping Weight: 0.875 lb
What’s Included
- Lee TL314-90-SWC double cavity mold blocks
- Attached handles
- Sprue plate
Frequently Asked Questions
What cartridges does the Lee TL314-90-SWC mold work for?
This mold casts .314 inch, 90 grain semi-wadcutter bullets suited for 32-20 WCF, 32 S&W Long, and 32 Colt New Police. It's a solid pick for keeping classic 32 caliber revolvers and lever guns fed. As always, confirm the cast diameter against your specific barrel for best results.
Do I need to buy handles separately for the 90311 mold?
No, the handles and sprue plate are included with this mold, so you can start casting without tracking down extra parts. The blocks are machined aluminum, which heats up quickly and resists rust. Just plan on a break-in before your first full session.
What does the TL in TL314-90-SWC mean?
TL stands for tumble lube, meaning the bullet design carries multiple shallow grooves made to hold tumble-style lubricant. This lets you skip traditional lube-sizing equipment and simply coat the bullets before loading. It's a convenient route for casters who want a cleaner, lower-fuss process.
Can I use bullets from this Lee mold without sizing?
Most bullets dropped from Lee molds can be used as cast without additional sizing, which keeps your workflow simple. That said, it's smart to measure your cast diameter and compare it to your barrel's needs. If sizing is required, a separate sizing kit handles that step.




Reviews
There are no reviews yet.