0
0

Lee 90300 Round Nose Pistol Mould – Double Cavity .311 93 gr

UPC: 734307903008

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're casting your own .32-caliber pistol bullets, this Lee double-cavity mould is one of the easiest ways to keep a steady supply of round nose projectiles on the bench. It drops a .311 diameter bullet weighing a nominal 93 grains, with a 1-ogive radius round nose profile that runs well in classic chamberings. Handles and a hard-anodized sprue plate come in the box, so you can set up and start pouring without hunting down extra parts.

What the Lee 90300 Mould Casts

The cavities are shaped for cartridges like .32-20 Winchester, .32 S&W Long, and .32 Colt New Police, along with similar .311 loads. Each bullet runs about .509 inches overall with the first lube groove sitting roughly .229 inches back from the nose, and the round nose shape carries a ballistic coefficient near .125. Two cavities mean two bullets come off every cast, which adds up quickly once you get a rhythm going.

Why Casters Reach for the Lee Double Cavity Mould

Lee machines these blocks from aluminum instead of iron or steel, and that choice pays off at the pot. Aluminum won't rust, lead doesn't want to stick to it, and the blocks heat up and cool down fast so you're dropping good bullets after just a few throwaway casts. The lighter blocks also mean less hand fatigue during a long session. Block halves are CNC machined for tight roundness and consistent sizing, and the sprue plate is hard anodized to hold up over time.

A quick note for anyone new to aluminum moulds: they're softer than steel, so treat them gently and give the mould a proper break-in before your first real run. Clean the cavities, smoke them lightly, and bring the mould up to temperature gradually. Do that once and it'll pay you back with clean, repeatable bullets for years. Keep in mind this mould does not include sizing equipment, so you'll want a lube and size setup to finish your bullets.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number (MPN): 90300
  • Model: 311-93-1R
  • UPC: 734307903008
  • Bullet Diameter: .311 inches
  • Bullet Weight: 93 grains
  • Bullet Type: Round Nose (1 ogive radius)
  • Cavity Count: Double (2-Cavity)
  • Block Material: Aluminum
  • Bullet Overall Length: .509 inches
  • Nose to First Lube Groove: .229 inches
  • Ballistic Coefficient: .125
  • Suggested Cartridges: .32-20 WCF, .32 S&W Long, .32 Colt New Police
  • Length: 10.6 inches
  • Country of Origin: United States

What’s Included

  • Lee double-cavity mould blocks (.311 93 gr round nose)
  • Mould handles
  • Hard-anodized sprue plate

Frequently Asked Questions

What cartridges does the Lee 90300 .311 mould work with?

The bullets it casts are sized for .32-20 Winchester (WCF), .32 S&W Long, and .32 Colt New Police, plus similar .311 diameter loads. The 93-grain round nose profile is a traditional fit for these classic chamberings. Always confirm sizing and load data in a current reloading manual for your specific cartridge.

Does this Lee mould come with handles?

Yes. The mould ships with handles and a hard-anodized sprue plate, so it's ready to use right out of the box. You will still need a lead pot, melting source, and sizing gear to finish your bullets, since those are not part of this package.

Why does Lee use aluminum blocks instead of steel?

Aluminum won't rust, lead doesn't adhere to it, and the blocks heat up and cool down faster than iron or steel. They're also about a third of the weight, which means less hand fatigue during a long casting session. The trade-off is that aluminum is softer, so the mould rewards gentle handling and a proper break-in.

Does the Lee 90300 mould include sizing equipment?

No, it does not. This mould casts the bullets only, so you'll want a separate lube and size kit to bring your cast bullets to final diameter and apply lubricant. Many casters pair it with a Lee Lube and Size kit matched to .311 or .312.

Additional information

UPC

734307903008

Manufacturer

Manufacturer Part Number

90300

Bullet Weight (Grains)

93

Color

2-CAVITY

Length

10.6000

Shipping Weight

0.875

Reviews

There are no reviews yet.

Be the first to review “Lee 90300 Round Nose Pistol Mould – Double Cavity .311 93 gr”