Description
The Lee Precision 429-200-RF is a double-cavity bullet mould that drops two .429 diameter, 200-grain round flat-nose pistol bullets every pour. It's a popular pick for folks loading .44 Special and .44-40 Winchester who want to keep their component costs down and take control of their own projectiles. The round flat-nose profile feeds smoothly and hits a flat meplat on target, making it a solid all-around design for range work and plinking alike.
What Sets the 429-200-RF Mould Apart
Like the rest of the Lee lineup, the blocks on this mould are machined from aluminum rather than cast iron or steel. That matters more than it sounds. Aluminum heats up and cools down quicker than iron, so you'll typically start dropping good, fully filled-out bullets after just a few throwaway casts while the blocks come up to temperature. The cavities are lathe bored for roundness and size control, which keeps your finished bullets consistent from the first cavity to the second.
Casting With the Lee 429-200-RF
The aluminum blocks are roughly a third the weight of iron or steel, so longer casting sessions won't wear out your hands and wrists the way heavier moulds can. The .429 diameter and 200-grain weight are figured on standard casting alloy, so keep in mind that harder alloys like linotype can drop a lighter bullet while softer pure lead runs closer to the mark. If you want exact weights, matching your alloy to your load data is the way to dial it in.
A Smart Starting Point for New Casters
This mould has long been a go-to for reloaders getting into bullet casting because it's straightforward to run and doesn't ask much of you to get rolling. It arrives with the handles and sprue plate already included, so you're set to melt, pour, and cut sprues right out of the box once you've got a pot and your alloy ready. Most Lee cast bullets can be loaded as-cast after lubing and sizing to your preference, keeping the workflow simple whether you're a weekend caster or feeding a steady .44 habit.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90285
- UPC: 734307902858
- Model: 429-200-RF
- Cavities: Double (2)
- Bullet Diameter: .429 inch
- Bullet Weight: 200 grain
- Bullet Profile: Round Flat Nose (RNFP)
- Caliber/Gauge: .44 Caliber (.44 Special, .44-40 Winchester)
- Block Material: Aluminum
- Bullet Overall Length: .598 inch
- Crimp Groove to Nose: .267 inch
- Ballistic Coefficient: .124
- Country of Origin: United States
What’s Included
- Lee 429-200-RF double cavity bullet mould blocks
- Mould handles
- Sprue plate
Frequently Asked Questions
What cartridges does the Lee 429-200-RF mould work for?
This mould casts a .429 diameter, 200-grain round flat-nose bullet that's well suited to .44 Special and .44-40 Winchester. The .429 diameter is the standard .44 caliber projectile size, so it covers the common .44 handgun cartridges. Always check your reloading manual or a powder maker's data for the right load with your specific alloy and firearm.
Will the bullets actually come out at 200 grains?
The 200-grain figure is based on a typical casting alloy. Harder alloys such as linotype tend to drop a slightly lighter bullet, while softer lead runs closer to or at the listed weight. If exact weight matters for your load, match your alloy to the data you're working from and weigh a few samples to confirm.
Does the Lee 429-200-RF mould come with handles?
Yes. This double cavity mould includes the handles and sprue plate, so you have everything on the mould side ready to go. You'll still need a melting pot, your casting alloy, and basic safety gear to get started.
Why aluminum blocks instead of iron or steel?
Lee uses aluminum because it heats up and cools down faster than iron or steel, which means you'll typically start dropping good bullets after just a few casts. The blocks are also about a third the weight of iron, so there's less fatigue during longer casting sessions. The cavities are lathe bored to keep your finished bullets round and consistent.




Reviews
There are no reviews yet.