0
0

Lee Factory Crimp Die .30 Tokarev / .30 Mauser (7.62×25) 90086

UPC: 734307900861

$19.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloading the 7.62×25 Tokarev and .30 Mauser can be a headache, since these small bottleneck cases are notorious for giving handloaders fits. The Lee Factory Crimp Die for .30 Tokarev / .30 Mauser takes that frustration off the bench by applying a firm, factory-style crimp that keeps bullets seated right where you put them. It uses a collet that squeezes the case mouth into the crimp groove, so you get a consistent hold round after round.

This is a hardened steel, collet-style bottleneck die, not a roll crimp or a carbide pistol die. The collet action means it's nearly impossible to buckle a case the way you can with standard roll crimp dies, which is a big deal on thin, short bottleneck brass like the 7.62×25. One of the nice perks is that your bullets don't even need a crimp groove. The collet is strong enough to form its own, so you have more flexibility with bullet selection.

What the .30 Tokarev / .30 Mauser Crimp Die Does on the Press

A firm crimp isn't just about holding the bullet. It raises the start pressure, meaning pressure has to build before the bullet moves. That tends to produce a more uniform pressure curve and tighter velocity spreads, which shows up as better consistency on paper. Reloaders working up loads for vintage Tokarev pistols and C96 Mausers lean on this die to bring rounds back to proper spec so they chamber and feed cleanly.

Fitment for the Lee .30 Tokarev / .30 Mauser Factory Crimp Die

The die uses the standard 7/8-14 thread, so it threads into any common single stage or turret press. It ships as a single die and comes in a plastic storage box to keep it protected on the shelf. Keep in mind the shellholder is sold separately, so grab the correct one for the 7.62×25 Tokarev / .30 Mauser case if you don't already have it in your kit.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90086
  • UPC: 734307900861
  • Caliber: 7.62x25mm Tokarev / .30 Mauser
  • Die Type: Collet-Style Bottleneck Factory Crimp Die
  • Number of Dies: 1 (single die)
  • Material: Hardened steel
  • Thread: Standard 7/8-14
  • Press Compatibility: Single stage and turret presses with 7/8-14 threads
  • Shellholder: Sold separately
  • Shipping Weight: 0.5 lbs

What’s Included

  • Lee Factory Crimp Die for .30 Tokarev / .30 Mauser (7.62×25)
  • Plastic storage box

Frequently Asked Questions

Is the Lee .30 Tokarev / .30 Mauser Factory Crimp Die a roll crimp or a collet crimp?

It's a collet-style bottleneck crimp die. The collet squeezes the case mouth into the crimp groove rather than rolling it over, which makes it very hard to buckle these short bottleneck cases. That's a real advantage on brass like the 7.62×25 that can be tricky to crimp with a standard roll die.

Do my bullets need a crimp groove to use this die?

No. The collet is strong enough to form its own groove as it crimps, so you can run bullets without a cannelure. That gives you more freedom in choosing projectiles for your Tokarev or Mauser loads.

Does the die come with a shellholder?

No, the shellholder is sold separately. You'll want the correct shellholder for the 7.62×25 Tokarev / .30 Mauser case if it isn't already in your kit. The die itself threads into any press using the standard 7/8-14 thread.

Will this die work for both 7.62×25 Tokarev and .30 Mauser?

Yes. The 7.62×25 Tokarev and .30 Mauser share case dimensions, so this single die covers both cartridges. It's a popular pick for folks loading for vintage Tokarev pistols and C96 Broomhandle Mausers.

Additional information

UPC

734307900861

Manufacturer

Manufacturer Part Number

90086

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Lee Factory Crimp Die .30 Tokarev / .30 Mauser (7.62×25) 90086”