Description
If you cast your own .243 bullets, you already know the two steps that make or break a cast load are lube and sizing. This Lee Precision Classic Bullet Sizing Kit handles the sizing half simply and cheaply, swaging your cast slugs down to proper diameter and catching them in a sturdy container that doubles as storage for the die itself. The steel sizing die runs standard 7/8×14 threads, so it threads right into any single stage press, and it'll work on Lee turret presses too if you pull the index rod.
How the .243 Sizing Kit Works on Your Press
What sets this design apart is the push-through setup. The included punch drops into your ram the same way a shell holder would, and bullets go through the die nose-first. That means you never have to buy a mold-specific top punch to shove them back out the way you do with older Lyman or RCBS sizers. Thread the die in, set a bullet on the punch, and run the handle. The sized bullet gets pushed up into the container and you're onto the next one.
Seating Gas Checks with the Classic Bullet Size Kit
If you're shooting gas-check bullets, this kit earns its keep. Just set a copper or aluminum gas check on the bullet base before you size, and the die seats and crimps it in place as the bullet passes through. One pull does both jobs. A quick note on lube: this is the sizing half of the equation, so you'll want Lee Liquid Alox for tumble lubing, which is sold separately along with the press. Most folks lube once, size and check the bullets, then give them a second light coat of Alox so the freshly sized surface stays protected.
It's a no-frills tool that does exactly what cast bullet guys need without the price or bulk of a dedicated lubri-sizer. Simple, proven, and built to last.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90083
- UPC: 734307900830
- Caliber: .243 Winchester (6mm)
- Bullet Diameter: .243"
- Thread Size: 7/8×14
- Material: Steel sizing die
- Press Compatibility: Single stage and turret presses (remove index rod on turret)
- Function: Sizes cast bullets, seats and crimps gas checks
- Shipping Weight: 0.93 lb
What’s Included
- Steel bullet sizing die (.243)
- Sizer punch
- Plastic catch and storage container
Frequently Asked Questions
Does the Lee .243 sizing kit come with lube?
No, this kit covers the sizing side only. You'll need Lee Liquid Alox, sold separately, to tumble lube your cast bullets before and after running them through the die. The press is also sold separately.
Do I need a special top punch to use this kit?
No, and that's one of the best things about it. Bullets push through the die nose-first using the included punch, so there's no mold-specific top punch required. The punch installs in your ram just like a standard shell holder.
Will this kit seat gas checks on my .243 cast bullets?
Yes. Place a gas check on the base of the bullet before sizing, and the die seats and crimps it in place as the bullet passes through. Lubing the bullet first with Liquid Alox helps it run through smoothly.
What presses does the Lee Classic Bullet Sizing Kit fit?
The sizing die uses standard 7/8×14 threads, so it fits any single stage reloading press. It'll also work on Lee turret presses if you remove the index rod first.



Reviews
There are no reviews yet.