Description
If you cast your own bullets in .457, this Lee Precision kit is the piece that gets them ready to load. It takes your freshly cast slugs and runs them down to a consistent diameter while handling gas checks in the same motion, which keeps your rounds chambering smoothly and shooting clean. The sizer die uses standard 7/8 x 14 threads, so it screws right into any single stage reloading press you already have on the bench.
How the Lee .457 Lube & Size Kit Works
The process is simple and part of why a lot of casters reach for this setup. Bullets are pushed through the sizing die nose first, so there's no need to buy special nose punches to match your bullet profile. The included push-through punch rides in the ram where a shell holder would normally sit, and as each bullet passes through, gas checks get seated and crimped automatically. Sized bullets drop into the red catch container, which doubles as a storage case for the die when you're done.
Picking the Right Size for Your .457 Cast Bullets
For cast bullets, the general rule is to pick a sizing die about .001 inch larger than your barrel's groove diameter. That keeps the bullet sealing the bore properly without shaving lead or driving pressures up. Bullets really only need sizing when they come out of the mold too large to drop freely into the chamber, so this .457 die is a common pick for big-bore handgun and rifle casters working with heavy lead projectiles.
One thing worth knowing up front: Lee Liquid Alox and the press itself are sold separately. All lead bullets need lube before they're loaded, and Lee recommends relubing after sizing so the freshly sized surface stays coated. The whole setup is built the way Lee builds everything, straightforward and effective without a lot of fuss.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90057
- UPC: 734307900571
- Caliber/Diameter: .457 Diameter
- Thread Size: 7/8 x 14
- Compatible With: Single Stage Presses
- Function: Size Cast Bullets, Seat & Crimp Gas Checks
- Media Type: Cast Bullets
- Material: Steel & Plastic
- Color: Red
- Quantity: 1 Kit
- Length: 5.55 in
What’s Included
- Sizer die (.457)
- Push-through punch
- Red catch container / storage case
- Instructions
Frequently Asked Questions
Does the Lee .457 Lube & Sizing Kit come with bullet lube?
No, this kit does not include lube. Lee Liquid Alox is sold separately, and you'll need it since all lead bullets must be lubricated before loading. Lee also recommends relubing after sizing so the freshly sized portion of the bullet stays coated.
Will this sizing die fit my reloading press?
It should. The sizer die uses standard 7/8 x 14 threads, which is the common die thread found on virtually any single stage reloading press. Keep in mind this kit is intended for single stage presses, and a press is not included.
Do I need special nose punches for different bullet shapes?
No, and that's one of the nice things about this design. Bullets are pushed through the die nose first, so no profile-specific nose punches are required. The included push-through punch goes in the ram in place of your shell holder.
What size sizing die should I choose for cast bullets?
A good starting point for cast bullets is a die about .001 inch larger than your barrel's groove diameter, which this .457 die provides for the appropriate bore. Sizing is mainly needed when a cast bullet is too large to chamber freely. If your bullets already drop in easily, you may only need to lube rather than size.





Reviews
There are no reviews yet.