Description
If you cast your own bullets for .45 ACP, .45 Colt, or any .452 diameter load, this is one of the cheapest upgrades you can make to your bench. The Lee Precision Classic .452 Bullet Sizing Kit runs your cast bullets through a steel sizing die to bring them to a consistent diameter, and it seats and crimps gas checks right in the same stroke. Bullets feed through nose first, so there's no fussing with special top punches to match each mold. Sized bullets drop straight into the included container, which also doubles as the storage case for the die when you're done.
What Makes the Classic .452 Sizing Kit Tick
The sizer die uses standard 7/8×14 threads, which means it screws into pretty much any single stage reloading press you already own. The push-through punch rides in the ram in place of your shell holder, so setup is quick. This kit is built for single stage presses, and the steel die is the part doing the real work here. Everything you need to size one diameter is in the box.
Getting the Most From Your Lee .452 Lube & Size Kit
A good rule of thumb with cast bullets is to pick a sizer about .001 inch over your barrel's groove diameter, which keeps things sealing well without oversizing. You'll want Lee Liquid Alox or a comparable bullet lube on hand, since lubricant isn't part of the kit. Many casters like to give bullets a coat of Alox, size them, then hit them with a second light coat so the sized surface stays protected. Reloaders consistently point out that running cast bullets through a sizer like this tightens up diameter consistency, which pays off in cleaner feeding and better accuracy downrange.
For anyone loading .45 caliber cast bullets, this is a simple, proven tool that's been on reloading benches for decades. It handles the sizing and gas check work without a lot of moving parts to fuss over.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90055
- UPC: 734307900557
- Caliber/Diameter: .452 Diameter
- Product Type: Lube & Size Kit
- Thread Size: 7/8×14
- Die Material: Steel
- Compatible With: Single Stage Presses
- Media Type: Cast Bullets
- Case Color: Red
- Quantity: 1 Kit
- Country of Origin: United States
What’s Included
- Steel sizing die (.452 diameter)
- Push-through punch
- Sizer/catch container (doubles as die storage case)
- Instructions
Frequently Asked Questions
Do I need anything else to use the Classic .452 Bullet Sizing Kit?
Yes, a couple of things. Bullet lubricant like Lee Liquid Alox is not included, so you'll need to supply your own. You'll also need a single stage reloading press with standard 7/8×14 threads, since the press itself isn't part of the kit.
What presses does this Lee .452 sizing kit work with?
The die uses standard 7/8×14 threads, so it fits virtually any single stage reloading press. The push-through punch takes the place of your shell holder in the ram. It's designed specifically for single stage presses rather than progressives.
Does the kit handle gas checks?
It does. The sizing die seats and crimps gas checks in place automatically as the bullet passes through, so you don't need a separate step for it. That makes it handy for gas-checked cast loads in .45 caliber.
What diameter should I pick for my cast bullets?
For cast bullets, a common recommendation is to size about .001 inch over your barrel's groove diameter. This .452 kit is a popular choice for many .45 ACP and .45 Colt cast loads. If you're unsure, slug your barrel to confirm groove diameter before choosing a sizer.





Reviews
There are no reviews yet.