Description
If you cast your own bullets, you already know that getting them to a uniform diameter makes a real difference downrange. The Lee Precision Classic Bullet Sizing Kit .429 handles that job in a simple, straightforward way. It lubricates and sizes your cast bullets, and it can seat and crimp gas checks right as part of the same push. The sizer die uses standard 7/8×14 threads, so it drops into just about any single stage reloading press you already have on the bench.
How the .429 Classic Bullet Sizing Kit Works
What makes this setup easy to live with is the push-through design. Bullets go through the die nose first, which means you don't need special nose punches or top punches matched to your mold. The included push-through punch sits in the ram in place of a shell holder, and it fits any ram that takes standard shell holders. Once a bullet passes through the die, it drops into the red plastic catch container so your finished bullets stay collected and clean. For gas checks, you push one onto the base of the bullet before sizing, and it gets seated and crimped on the way through.
Picking the Right Size and Getting Good Results
This is the .429 diameter version, which covers a lot of common .44 caliber cast loads. A good rule of thumb when sizing cast bullets is to choose a die about .001 inch larger than your groove diameter. Sizing your bullets to a consistent diameter helps with uniform start pressure and tends to tighten up accuracy. Keep in mind that all lead bullets need to be lubricated, and Lee recommends relubing after sizing so the sized portion stays coated.
What You'll Need to Run the .429 Lube & Size Kit
The kit gives you the steel sizer die, the sizer punch, the sturdy plastic sizing container, and instructions. You'll want Lee Liquid Alox for lubrication and a single stage press to run it, and both of those are sold separately. For folks who want a clean, affordable way to finish their cast bullets, this kit is a longtime favorite on the loading bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90054
- UPC: 734307900540
- Model: Classic Bullet Sizing Kit
- Diameter: .429 inch
- Thread Size: 7/8 x 14
- Compatible With: Single Stage Presses
- Function: Lube and size cast bullets, seat and crimp gas checks
- Die Material: Steel
- Container Color: Red Plastic
- Quantity: 1 Kit
- Media Type: Cast Bullets
What’s Included
- Steel sizer die (.429)
- Push-through sizer punch
- Red plastic sizing catch container
- Instructions
Frequently Asked Questions
Do I need a special press to use the Lee Classic Bullet Sizing Kit .429?
No, the sizer die uses standard 7/8×14 threads, so it fits just about any single stage reloading press. The push-through punch also fits any ram that accepts standard shell holders. This kit is intended for single stage presses only.
Does this .429 kit come with lube and a press?
It does not. The kit includes the sizer die, punch, catch container, and instructions. Lee Liquid Alox and a reloading press are required to run it and are sold separately.
Can the Classic Bullet Sizing Kit seat gas checks?
Yes. You push a gas check onto the base of the bullet before sizing, and as the bullet travels through the die it gets sized and the gas check is seated and crimped on in the same motion. That saves you a separate step at the bench.
How do I know if .429 is the right size for my cast bullets?
A common guideline is to pick a sizer about .001 inch larger than your barrel's groove diameter. The .429 diameter suits many .44 caliber cast loads. Sizing helps keep bullets uniform, which supports consistent start pressure and better accuracy.




Reviews
There are no reviews yet.