Description
If you cast your own .356 bullets for 9mm Luger, 38 Super, or 380 Auto, this kit takes the guesswork out of getting them to the right diameter. The Lee Precision Classic Bullet Sizing Kit .356 lets you size cast bullets, lubricate them, and seat and crimp gas checks in one simple operation. Bullets get pushed through the steel sizer die nose-first using the included push-through punch, which sits in your ram in place of a shell holder. Once sized, they drop straight into the sturdy plastic catch container so you're not chasing them across the bench.
How the Classic Bullet Sizing Kit .356 Works
The sizer die threads into any standard 7/8×14 press, so it drops right into the gear most reloaders already own. Because the bullets feed nose-first, there's no need for special nose punches matched to each bullet profile. That nose-first push-through design is one of the reasons folks who cast for pistol stick with the Lee system year after year. This kit is built for single stage presses, which is where it really shines for careful, consistent work.
Picking the Right Size for Cast Bullets
A good rule of thumb when casting is to size roughly .001 inch over your barrel's groove diameter, which is why the .356 is a popular choice for a lot of 9mm and 38 Super shooters. Sizing keeps your bullets uniform, helps them chamber cleanly, and can tighten up accuracy by giving you consistent start pressure. Lead bullets need to be lubricated, and Lee recommends relubing after sizing so the sized portion stays properly coated.
What to Know Before You Start
Keep in mind the press and Lee Liquid Alox bullet lube are sold separately, so grab those if you don't already have them on the bench. The steel die is well made and the whole setup is about as straightforward as bullet sizing gets. For anyone casting their own and wanting clean, repeatable results, it's a workhorse little kit.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90046
- Model: Classic Bullet Sizing Kit
- UPC: 734307900465
- Caliber/Diameter: .356 Diameter
- Thread Size: 7/8×14
- Function: Size Bullet, Lube, Seat & Crimp Gas Checks
- Compatible With: Single Stage Presses
- Media Type: Cast Bullets
- Material: Steel
- Finish: Silver
- Color: Red (catch container)
- Quantity: 1 Kit
- Country of Origin: United States
What’s Included
- Steel sizer die
- Sizer push-through punch
- Plastic catch container
- Instructions
Frequently Asked Questions
Which calibers does the .356 sizing kit work for?
The .356 diameter is a common choice for cast bullets used in 9mm Luger, 38 Super, and 380 Auto. A good rule of thumb is to size your cast bullets about .001 inch over your barrel's groove diameter. If you're unsure, slug your bore to confirm before choosing a size.
Do I need anything else to use the Classic Bullet Sizing Kit .356?
Yes. The reloading press and Lee Liquid Alox bullet lube are sold separately, so you'll want both on hand before you get started. The kit itself includes the sizer die, push-through punch, and catch container. Any standard 7/8×14 single stage press will accept the die.
How do the bullets go through the die?
Bullets are pushed through the sizer die nose-first, which means you don't need special nose punches matched to each bullet shape. The push-through punch replaces the shell holder in your ram. Once sized, the bullets drop into the included catch container.
Can this kit seat and crimp gas checks?
Yes, the kit seats and crimps gas checks in place as part of the sizing operation. That makes it handy if you're running gas-checked cast bullets for higher velocity loads. Everything happens in one pass through the die.




Reviews
There are no reviews yet.