Description
If you're casting your own bullets, getting them to a consistent diameter is where accuracy starts, and the Lee 90039 Lube & Sizing Kit handles that job for .311 projectiles without any fuss. Bullets are pushed through the die nose first, which means you don't need a specially fitted top punch for every bullet shape. Gas checks get seated and crimped right in the same stroke, and each sized bullet drops into the red container that doubles as storage for the whole kit when you're done.
What the Lee .311 Sizing Kit Does on the Bench
The steel sizer die uses standard 7/8 x 14 threads, so it screws into any single-stage press you already have, Lee, Hornady, RCBS, Lyman, or Dillon. The push-through punch replaces your shell holder in the ram, and exact die depth isn't critical, which keeps setup quick. A good rule of thumb is to pick a sizer .001 inch larger than your barrel's groove diameter so the bullet seals the bore without getting squeezed too tight.
Getting the Most From This Classic Bullet Sizer
Because lube isn't part of the package, plan to pair it with Lee Liquid Alox or your preferred lube. Lee recommends giving bullets a quick re-lube after sizing to make sure the sized band stays coated. Not every cast bullet needs sizing, but if yours are running large enough to make chambering stiff, running them through brings everything uniform and tends to tighten up groups.
Who Reaches for the Lee 90039
Reloaders working with .311 projectiles for 7.62×39, 7.65 Argentine Mauser, .303 British, and similar bores lean on this kit. It also earns its keep sizing polymer-coated bullets down to spec, and plenty of folks run it on a Lee APP press to crank through bulk batches in a hurry. For low to medium volume sizing, it's a simple, dependable tool that does exactly what it promises.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90039
- UPC: 734307900397
- Model: Classic Bullet Sizing
- Caliber/Diameter: .311
- Product Type: Lube & Size Kit
- Thread Size: 7/8 x 14 Standard
- Die Material: Steel
- Finish: Silver
- Compatible With: Single-Stage Presses
- Media Type: Cast Bullets
- Function: Size Bullet, Seat/Crimp Gas Checks
- Container Color: Red
- Quantity: 1 Kit
- Country of Manufacture: United States
What’s Included
- Steel sizer die (.311, 7/8 x 14 threads)
- Push-through sizer punch
- Red plastic sizer container/case
- Instructions
Frequently Asked Questions
Does the Lee .311 Sizing Kit come with lube?
No, lube is sold separately. You'll want to pair it with Lee Liquid Alox or another bullet lube of your choice. Lee also suggests giving bullets a quick re-lube after sizing so the sized portion stays coated.
What presses will the Lee 90039 sizer die fit?
The die uses standard 7/8 x 14 threads, so it fits any single-stage press that accepts standard dies. That covers common brands like Lee, Hornady, RCBS, Lyman, and Dillon. The push-through punch installs in the ram where your shell holder normally sits.
Can this kit seat gas checks on cast bullets?
Yes. Just set the gas check on the base of the bullet before pushing it through, and the die seats and crimps it in place during the same stroke. It's a handy way to get uniform gas-checked bullets for calibers like 7.65 Argentine and 7.62×39.
How do I choose the right size for my barrel?
A common guideline is to pick a sizer about .001 inch larger than your barrel's groove diameter. The .311 version suits bores in that range, including many 7.62×39, .303 British, and 7.65 Mauser rifles. Sizing brings bullets to a uniform diameter, which helps with consistent start pressure and accuracy.





Reviews
There are no reviews yet.